发信人: humanmale(艺)
整理人: b8238(2004-08-29 11:23:07), 站内信件
|
请大家共同帮助
有问题就问,我一一做答.
关于PROCODER2的设置说明,我觉得有些说多了是浪费
有些确实不了解,不知道,不懂的我们一起学习.
大家有疑问,就提出来.
Canopus ProCoder2 DVD 设置模板向导
我很想汉化这个软件,可是这家伙的动态连接库太多了,以至于所有的汉化工作不是技术工作
而是体力工作—要把30多个动态链接库所有英文字符串替换.
我就一个人,我能翻译替换,但是我怕我的食指功能衰竭^^^^^^^^^^
开始吧,就这个.DLL,我们一起来探讨:
Destination: 目标文件
――Base name-- MPEG2_DVD_PAL
Path--选定你最终生成的VCD DVD文件存放目录与名称
Use source filename if required—生成文件使用原文件名—推荐使用
File name—生成文件名称
Target file splitting: 文件分割方法
这个选项的目的是因为很多DV爱好者的操作系统还在使用FAT32分区—文件不可以超过4GB,如果是NTFS分区,就不会出现这个问题.一张标准的D5格式DVD最大容量是4.7GB,所以如果你没有使用NTFS分区就需要对生成的文件进行分割.
Choose Splitting Method分割方法:
No Splitting不分割
plit using Time Interval 使用时间分割
Split using max. Size 使用文件尺寸分割
Procoder Reference
Target Common Options
Most targets contain these options and they all have the same meanings. Some options may not appear in certain targets, may be in different locations or may only appear under certain circumstances. Certain settings may be disabled when using target presets.
Options
Target File Splitting (Advanced)
Choose Splitting Method
Selects the automatic file-splitting method. Automatic file-splitting can divide output files into separate files for easier archiving or transport. File-splitting is not related to multiplexing. File-splitting cannot be used with multi-pass encoding. Not all formats support file splitting.
No Splitting - Do not automatically split output files.
Split using Time Interval - Start a new output file when the current output's video length reaches the specified maximum time.
Split using max. Size - Start a new output file when the current output's file size reaches the specified maximum size.
Interval Time for Splitting (Minutes)
Sets the time interval to split output files at in minutes. For example, if the interval time is set to 10 minutes, a 35-minute source will be split into 4 output files.
Max. File Size for Splitting (MB)
Sets the size to split output files at in megabytes. For example, if the max file size is set to 650 MB and the total output size is 1.5 GB, there will be 3 output files.
Quality/Size
Click the ... button to bring up the Quality/Size Configuration window. The Quality/Size Configuration window displays the media requirements for your conversion parameters and can set the bitrate to an appropriate value based on the number of media you want to output to.
For example, if your target media is a single CD-R (650 MB) and your current setting will output 800 MB, the Number of media will be 2. You can then adjust the Quality slider until the Number of media reads 1.
Alternatively, you can enable the Fill Media if possible option, then set the number of media to 1. ProCoder will automatically calculate an appropriate bitrate to fit within the media requirements, if possible.
This option is only available under the following circumstances:
The target supports a user-specified bit rate for encoding
Split using max. Size is enabled
There is only a single source or the Stitch function is enabled.
Destination
Base Name
Sets the name of the output file. A few special substitution strings can be used in the Base Name and ProCoder will replace them with the values during its processing. Periods are not allowed in the base name.
%s is replaced by the name of the source file (without extension) unless the Stitch function is used, in which case %s will be replaced by {Stitched Sources}
%n is replaced by the file-splitting segment number of the output file. If file-splitting is disabled, %n will be 0.
%% is replaced by a percent-sign (%).
Path
Sets the output location for the target file(s). Click the ... button to set the output folder.
Use source filename if required
Enable this option to automatically append the source filename to the output filename when the following is true:
There is more than one source
The Stitch option is not enabled
The %s substitution string is not present in the Base Name
File Name
Displays the output file name or an example if one of the substition strings is used.
Video
Use Video
Choose how ProCoder will output video for the target.
Use always - A video track is always output. If the source has no video, a black video track is generated.
Use if Exist - If the source has video, that video will be output. If the source has novideo, no video track is generated.
Don't Use - A video track is not generated, even if the source contains video.
Width
Specifies the width of the output video frame in pixels.
Height
Specifes the height of the output video frame in pixels.
Video Bitrate(kbps)
For non-fixed bitrate codecs, sets the video bitrate in kilobits-per-second. Generally, the higher the bitrate, the better the video quality is.
Frame rate
Sets the number of frames per second for the output video. The higher the frame rate, the smoother motion will appear, but the video requires more bits. A good balance between video frame rate and video bit rate is the key to high-quality playback.
Interlacing
For formats the support interlaced output, this option sets the interlacing mode for the output. This option determines how video frames are stored in the video stream. If playback hardware or software does not use the same interlacing method, the video may not play back smoothly.
Non-Interlaced (Progressive) - Entire frames are stored in the stream instead of separate fields.
Lower/Bottom Field First - Frames are stored as separate fields with the lower field first.
Upper/Top Field First - Frames are stored as separate fields with the upper field first.
Aspect Ratio
Sets the aspect ratio of the video image, as width x height, width:height or a width-to-height ratio for the video frame and/or the display pixels.
If available, click the ... button to select either a video frame aspect ratio or a pixel aspect ratio.
Audio
Use Audio
Selects whether the target will contain an audio track.
Use Always - The target will always contain an audio track, even if the source does not contain audio.
Use if Exist - The target will contain an audio track if the source contains audio. If the source does not contain audio, the target will not have an audio track.
Don't Use - The target will not have an audio track, even if the source contains audio.
Channels
Sets the number of channels and if applicable, the channel type for the audio output. Common options are:
Stereo - Two channels of audio (left/right).
Mono - One channel of audio.
Sample Rate(kHz)
Sets the sampling rate or number of samples per second, of the audio in thousands of samples per second. The reproducible frequency range of encoded audio depends on the sample rate.
Bits / Sample
Sets the audio sample size in bits per sample. The more bits per sample, the better the representation of changes in the audio level and hence the better the audio quality. The combination of sample rate and bits per sample determine the overall quality of the audio.
Audio Bitrate(kbps)
For non-fixed bitrate codecs, sets the audio bitrate in kilobits-per-second. Generally, the higher the bitrate, the better the audio quality is.
Audio Codec
Selects the audio codec used to decode the source audio.
另外,我一个月稿费是5000多,不过不是DV方面的.
是民用航空器维修领域,属于业内.
我发DV方面的,纯属爱好,我要是拿大家的心血去挣钱--绝子绝孙!!!!
希望大家共同探讨!
|
|