发信人: bok()
整理人: reynolds(1999-10-13 09:14:55), 站内信件
|
1. Drag and drop question with an exhibit
which showed a client,
router and server with IP addresses next
to client, near side and
far side of router and server. Then you
got a box with IP
addresses. A numbered box contained the
place holders.
Scenario? TCP/IP has been installed.
Client cannot connect to
server. How must you trouble shoot?
Answer -You first had to drag 127.0.0.1 from the
box
of IP addresses and place in the box
numbered one, then the default
gateway ip address, then the near side of
the router IP address and
finally the IP address of server on the
remote subnet. A catch was
that they also provided you with IP
address of the far side of the
router on the exhibit but not on the box
containing the list of IP
addresses - however, you did not need this
as you had the IP
address of the remote server.
2. Another drag and drop question with an
exhibit which showed 3
subnets. DHCP was installed on the server
on Subnet A, WINS was
installed on the server on subnet B. You
were told that Subnet C
had non-WINS clients. You were given a box
with WINS proxy, DHCP
Relay Agent and two other bogus choices.
Answer - You were required to drag the WINS
proxy option and drop it directly onto the
exhibit on Subnet C which non-WINS clients, and
you were also required to drag and drop the DHCP
Relay Agent on Subnet B. (note, this question
can be rephrased!!! Just remember to drop the
WINS proxy on the non-WINS clients)
3. The hardcode question. You were told
that two applications are
running, each on a separate server. Each
server had a NIC and each
had separate 'hardcoded' IP address. You
need to move both
applications onto one server. How must you
configure the server(s),
Answer - Install one NIC and allocate both
IP addresses to the NIC.
4. You need to connect NT workstation to a
Unix server and require
authentication security.
Answer - Install (on the NT WS) Peer Web
Service, create a ftproot directory and disable
anonymous logins.
5. You have a client that cannot connect
to any host on his local
subnet via Explorer. TCP/IP is installed
and you successfully ping
the local loopback address. In addition,
you cannot even ping any
host on the local subnet.
Answer - invalid subnet mask
6. A client is unable to log on and you
suspect that the DHCP
server is sending a DHCPNACK. Which
utility can you use to detect
whether the client is receiving a DHCPNACK
message.
Answer - NetMon but I am unsure ... check
this one as it could be DHCP
7. You want to view a list of jobs you
sent to a UNIX-based TCP/IP
print server.
Answer - LPQ.
8. Which utility will you use to
purge/reload the routing table.
Answer - NBTSTAT -R
9. You have a large network and every
client needs to browse every
other client, etc.
Answer - Install WINS.
10. Which file does a DNS root server use
to connect to the
Internet?
Answer - cache.dns file.
11. From your UNIX server, you need to
collect/monitor network
statistics on a NT sever.
Answer - You need to install SNMP Manager
software on the UNIX pc and SNMP
Agent software on the NT server.
12. How do you calculate the number of
subnet ids you will require.
Answer - One for each NIC and one for each
router interface.
13. You need to make all clients aware of
the IP address of the DNS
server on a network where DHCP is
installed.
Answer - global option.
14. You install DNS on a NT server and now
need to add a resource
for the domain mail server. Which resource
record must you add?
Answer - MX
15. You have a Ras server connected to the
Internet. Remote users
use DUN to connect to the Ras server
through a local ISP. You need
to provide security so that remote users
can access your network
using only Point-to-Point Tunnelling
Protocol (PPTP). How should
you set up the Ras server?
Answer - activate PPTP filtering
16. There is a network named xxx.com consisting
only one subnet A. There is WS1 and DNS server
in one side of the router. On the other side,
there is a server Market. You run the command
ftp Market.xxx.com, but failed, why? (Choose
three)
Answer -
a) WS1 is not configured with the IP
address of DNS server
e) There is no entry of Market in the
HOSTS of WS1
g) There is no entry of Market in the DNS
server
(these were the options I chose, remember
the question and solution could be
rephrased!!! )
17. You are brought in as a consultant to
set up TCP/IP on a network
of Microsoft Windows-based computers. The
network is comprised of
five subnets, each with its own domain
controller. Every host must
be able to browse every other computer and
perform peer-to-peer
connections. The network must also
register and resolve computer
names automatically through a central
database. What is the best
choice to install on the network?
Answer- WINS servers (remember all pc's
must be browsed)
18. A coworker on a Windows NT Workstation
computer named NTWA10 on
SubnetA cannot connect to a Windows NT
Server computer on SubnetB
with the command NET USE F:
\\bserv.corp.com\data. Using another
Windows computer on SubnetA, you succeed
in making the same
connection with the command NET USE
F:\\bserv.corp.com\data. What
is the most likely cause of the problem?
Answer- NTWA10 is not set up with the IP
address of the DNS server.
19. You use DHCP to assign IP address to
all clients' computers on
your network. You configure the DHCP
server to assign the IP
address of the WINS server to all clients
computer. What else do to
use wins?
Answer- Specify the netbios name
resolution node type
20. One application server IP:
192.168.50.10, another application
server IP: 192.168.50.8. Now you want to
place both on ONE server,
How?
Answer - Install one NIC, and assign 2 IP.
(this is the hardcoded ip?)
21. You want to chart the num of TCP
connection on NT, use which
one?
Answer -Network monitor Agent
22. DNS on NT for Unix, you want to mange
host name minimum admin...
Answer - Enable WINS resolution on DNS
(keyword is minimum admin)
23. Two DNS servers. You plan to install a
third DNS server which
will be used to resolve DNS queries for
resource that are located
on the internet.
Answer - as a forwarder for the exiting
DNS server
24. From your NT workstation you can
connect to a remote server by
specifying the's UNC path in Windows
explorer, but when you try to
connect through ftp 199.34.23.100, you
can't. What is the problem?
Answer - The NT workstation is denied
access to the FTP server's
Directories
25. You administer a TCP/IP network that
comprised of 7 domains.
The domains are divided into 6 subnets and
you want every
Windows-based computer to be able to
browse al the computers in
every domain. Which entries must be
included in the LMHOSTS file on
each windows-based computer?
Answer - One entry for the PDC in each
remote domain One entry for each
domain controller in the local domain
26. Your network has 6 subnets. Each has
150 NT workstations, 25
Unix machines, and 25 Win95 notebooks. You
have a DNS server on one
subnet and each subnet has a WINS server.
What can you do to do
less administration on the DNS server to
resolve NetBIOS names into
IP addresses?
Answer - Enable WINS resolution for DNS
27. Shades uses a Windows NT Workstation
computer on a TCP/IP network
with several subnets. Running the command
ftp 144.104.3.4, she
connects to a Windows NT Server computer
on a remote subnet.
However, when Shades specifies the same
server's UNC path in Windows
NT Explorer, she cannot connect. What is
the most likely cause of
the problem?
Answer - The server is not set up to use a
WINS server. (keyword is UNC 'cause then the
answer is always WINS)
28. A Windows 95 user complains that she
cannot connect to any
computers on her local subnet even when
using their IP addresses.
Seated at her computer, you ping 127.0.0.1
and receive a reply.
Other users on her subnet do not report
having any trouble. All
client computers on the network are WINS-
enabled. What is the most
probable cause of the problem?
Answer - The subnet mask on the Windows 95
computer is incorrect.
29. Halo administers several hundred
Windows-based computers on a
TCP/IP network with five subnets. Many
users have laptop computers
that run Windows 95. Halo wants to
automatically assign IP
addresses to these laptop computers each
time they connect. Which
service must Roger configure?
Answer - DHCP 'cause its used to auto
assign ip's duh!! :)
30. Suppose the following situation exists:
Karen wants to install a Windows NT Server
computer with four
network adapter cards on her TCP/IP
network. This server will act
as a router.
Required result:
The server must route TCP/IP packets.
Optional desired results:
The server should dynamically update its
routing tables when other
routers are added to or removed from the
network.
The server should provide IP addresses to
every client computer on
each subnet.
The server should send trap messages
across the network to a UNIX
server.
Proposed solution:
Assign one IP address to each network
adapter card on the server.
Install WINS services on the server.
Install DHCP services on the server.
Create one scope for each
subnet.
Install the SNMP services on the server.
Set up SNMP to forward
trap messages to the UNIX server.
Which results does the proposed solution
produce?
Answer - The proposed solution does not
produce the required result.
(Because IP forwarding is NOT enabled!!!! Check
transcenders)
31. Fred manages a network that is
comprised of four Windows NT
Server computers.....Required results:
Every Windows-based computer on each
subnet must be able to access
the Windows NT Server computers by
computer name.
Every Windows-based computer on each
subnet must also be able to
receive its IP addresses from the DHCP
server.
Optional desired results:
All UNIX systems should access by hostname
any Windows NT Server
computer that is set up as an FTP server.
All Windows-based computers should access
by hostname any UNIX
computer that is set up as a Telnet or FTP
server.
Proposed solution:
Set up routers to forward DHCP broadcasts
to all subnets.
Install a WINS Server on the network.
Set up the DHCP server to supply all DHCP
clients with the IP
address of the WINS server.
On the DHCP server, exclude the IP
addresses of the UNIX computers
from the scopes. Create a client
reservation for the IP address of
the WINS server.
Answer -c) The proposed solution produces
the required results and none ofthe optional
desired results.
32. Fred manages a network that is
comprised of four Windows NT
Server computers...
Required results:
Every Windows-based computer on each
subnet must be able to access
the Windows NT Server computers by
computer name.
Every Windows-based computer on each
subnet must also be able to
receive its IP addresses from the DHCP
server.
Optional desired results:
All UNIX systems should access by hostname
any Windows NT Server
computer that is set up as an FTP server.
All Windows-based computers should access
by hostname any UNIX
computer that is set up as a Telnet or FTP
server.
Proposed solution:
Set up the network routers to forward DHCP
broadcasts to all
subnets.
Install a WINS Server on the network.
Set up the DHCP server to supply all DHCP
clients with the IP
address of the WINS server.
On the DHCP server, exclude the IP
addresses of the UNIX computers
from the scopes. Create a client
reservation for the IP address of
the WINS server.
On the WINS server, make static mapping
entries for the UNIX
computers.
Which results does the proposed solution
produce?
Answer - The proposed solution produces
the required results and only
one of the optional desired results.
(these scenarios can be found in transcender
exams, I remembered these by
checking the no of proposed solutions given
ie 4=c, 5=b, 6=a )
33. Martha administers a TCP/IP network
that is comprised of six
Windows NT Server computers, 17 UNIX
computers and 350 Windows NT
Workstation computers. The workstations
are set up as both DHCP
clients and WINS clients. Martha installs
the Microsoft DNS Server
service on one of the Windows NT Server
computers. The UNIX
computers will use the DNS server for
hostname resolution. The
computer names and IP addresses of the
UNIX computers have been
entered into the DNS server database. How
can Martha manage
hostname resolution with the least
administrative effort?
Answer - on the DNS server, enable WINS
resolution
34. A computer named WKsta1 on subnet A
cannot connect to a WinNTserver on subnet B by
running the command net use
f:\\factory.bytecomp.com\data when other client
computers on subnet
A run that command, they connect to the
server. WKsta1 can ping the
server by IP address.
Answer - WKsta1 is not configured with an
IP address for a WINS server.
35. Working at a UNIX computer, u want to
view TCP/IP protocol
statictis for a WinNT server computer.
Both computers are on the
same TCP/IP network. What should u use?
Answer - On the Unix computer - SNMP
management software
On the server - the SNMP service
36. You r using a WinNT w/s on TCP/IP
network. When you run the
command ftp 131.107.3.4 , you connect to a
WinNT server computer on
a different subnet. However, when you use
Windows NT Explorer and
specify the UNC path of that server, you
fail to connect.
Answer - The server is not configure to
use WINS.
37. You want to analyse and decode TCP/IP
packets that are receive by Windows NT
server computer that you can perform network
capacity
planning for various types of IP traffic.
Which utility should you
use
Answer - Network monitor
38. Your network has two DNS servers you
plan to install a third
DNS server. The third server will be used
to resolve DNS queries
for resources that are located on the
Internet. Choose one from the
following:
Answer - Forwarder for DNS
39. You have three subnets in which a
single subnet is populated
with 10 Laptop workstations and the other
two subnets with NT
Workstations. You want the 1st subnet to
be supplied with IP
addresses(of course by DHCP) with a lease
acquisition period of 10
days.The other two subnets with 30 & 40
days lease period
respectively. How will you configure?
Answer - One DHCP scope for each subnet
and specifying lease period as part of the scope
config
40. You don't want to resolve host names
into IP address using a
DNS which contains static entries in it.
What will you install in
alliance with DNS to resolve IP address
from a dynamically updated
DNS database?
Answer - WINS and enable DNS for WINS
resolution
41. Network has 3 subnets. A single domain
for all people. Subnet A
has a PDC, Subnet B has BDC, and Subnet C
has 35 NT workstation. No
WINS. You want to configure the Network, so that
all workstation can log
on domain.
Answer - On each workstation, create
LMHOSTS that contain
entries for each domain controller.
42. You want to be able to chart the
numerical of TCP connection
remotely from your NT server,what service
do you need to install on the
server?
Answer - SNMP service. ( NOT performance
monitor!!!!)
43. What is the utility to view the
contents of the arp cache?
Answer - ARP.exe
44. Which utility will you use to export
the statistics collected
to a spreadsheet for future analysis?
Answer - Performance Monitor
45. You need to send print job to a
printer connected to UNIX from
you Ntworkstation. Which utility you use?
Answer - LPR (remember LPQ is to VIEW
print jobs)
46. Three UNIX machines are to be stored
in the WINS Database
manually and what entry will you put at
the WINS configuration
panel?
Answer - UNIQUE
47. Shades sets up a server that connects
to an Internet
services provider ( ISP) over ISDN line.
How should the default
gateway address be configured so that
windows 95 users on the local
network can access the Internet through
the RAS server.
Answer - The default GW address on WN95
must specify the IP address of
the RAS server to the local network.
48. Output of ipconfig all
Ip address 149.69.69.69
Wins server 149.69.69.100
DNS server address 149.69.69.102
Default gateway 149.69.69.2
Sunnet mask 255.255.0.0
Wins to use DNS resolution : NO
Node type : H
Which resolution methods are being used.
Answer - WINS, broadcast and lmhosts
49. Your network consist of 7 subnets. One
subnet have a PDC and the
rest each a BDC or a server. You want all
clients to be able to
connect to all servers on the network, but
you don't want
broadcast. How will you configure the
network for best performance?
Answer - Install a WINS server
50. You are configuring a IIS server on
NT Server which is going to
be used as a FTP Server and also a WWW
Server. How will you
configure it for the Host record?
Answer - CNAME
51. What is the utility to view who are
all currently having TCP/IP
connection with your Workstation?
Answer - NETSTAT
52. What is the utility to view what
configuration changes the DHCP
made at your workstation Configuration?
Answer - IPCONFIG/ALL
53. What is the utility to monitor the
Ethernet traffic and the
TCP/IP statistics?
Answer - NETSTAT -e -s (KNOW the
switches!!!!)
54. Which utility will you use to export
the statistics collected
to a spreadsheet for future analysis?
Answer - Performance Monitor
55. What utility will you use to
construct a capacity planning on
all statistical datas you collected?
Answer - Performance Monitor
56. What is the utility to view Cumulative
statistics since your
server was booted?
Answer - NETSTAT
57. What do you use to find the path a
packet takes?
Answer - Tracert
58. You want the Unix member workstations
to print jobs at the NT
print server connected print device. How
will you configure?
Answer - install tcp/ip and share printer
59. You want a WINS Client Workstation in
Subnet A to browse and
communicate with the another workstation
in Subnet B. But it can't,
even though the other subnet has their own
WINS Server installed.
What could you do?
Answer - Setup WINS Replication between
the 2 subnets.
60. You have a HOSTS file with the
following entries:
157.21.36.121 UNIX Product
157.51.25.110 Product developer
When you enter "ftp product" you get
attached to the ftp server
"product". But when you enter "ftp
157.51.25.1 10" you can't access
it. Why?
Answer - Invalid FTP Server IP address.
61. A Windows NT Workstation computer
resides on a WINS-enabled
network. In which order will the computer
perform name resolution
if the computer is configured to use an
LMHOSTS file?
Answer - Localcache -WINS server -
broadcasting -LMHOSTS
(Larry Wept Before LeavingHome)
62. What node type do you setup your
client computer to use if you want
it to use WINS for name resolution before
it broadcasts a request?
Answer - h-node
63.You are using WINS Manager to configure
a WINS server. Which
parameter or parameters can be entered?
Answer - a DNS server name
64. Your network consists of 3 subnets and
you want to implement WINS.
You plan to install a WINS server on I of
the subnets. You want all
computers on each subnet to register their
computer names with the
WINS server. What do you need to do?
Answer - Configure each Windows-based computer
with address of WINS server.
65. You want to manually add an entry to
WINS database for a
workstation computer that has 3 network
adapters. This computer is
not configured to use WINS. What type of
entry must you add?
Answer - Multihomed
66. You want to add an entry for the PDC
from the CORP domain into the
LMHOSTS file. The PDC is named acctg and
the IP address is
142.170.16.200. Which entry do you add?
Answer - 142.170.16.200 acctg #pre
#dom:corp
67. Your network consists of 4 subnets.
One contains the PDC. The other
3 have a BDC. Each BDC acts as a master
browser for its own subnet.
You don't use WINS. You want to ensure
each BDC can communicate
with the PDC. What do you do?
Answer - On each BDC, create an LMHOSTS
file with an entry for the PDC
68. You are working at a WINS server and
you want to import the file
that contains computer name-to-IP address
mappings into the WINS
database on thesis server. Which file
should you import?
Answer - LMHOSTS file
69. You manage a TCP/IP network of both
Windows-based and UNIX
computers with three subnets connected by
a single router. After
installing WINS server on Subnet A, you
configure Windows-based
clients to register NetBIOS/domain name
with WINS. You soon
discover that the UNIX computers on
Subnets B & C are not able to
use WINS for name resolution. What can you
do?
Answer - Install WINS proxies on Subnets B
& C
70. Why would you change the NetBIOS scope
value on the WINS Address
tab?
Answer - To isolate a group of computers
on the network.
71. What services are started with WINS?
Answer - Messenger, Workstation
72. Michael is planning a TCP/IP network that will be comprised of six
subnets. All the computers on the network will be Windows-based.
Which service should Michael install to provide for name resolution
on his network?
Answer - WINS
73. How is a mail server identified in the hosts file?
Answer - MX (how easy a question can you get ??? :) )
74. Which two utilities allow you to view a summary of IP
statistics and Ethernet
statistics for a Windows NT Server?
Answer - Network Monitor
Netstat
75. You want to view a list of all current TCP/IP connections to
your NT Server. What utility should you
use?
Answer - Netstat
76. Which two utilities can you use to
view the routing tables on a
Windows NT Server computer?
Answer - Route
Netstat (remember the
switches!!!!!!!!!! )
77. From your NT workstation, you want to
use Performance Monitor
to collect statistics for all TCP/IP traffic on
the NT Server computers. What
should you do?
Answer - Install the SNMP service on each
server.
78. A Windows 95 user complains that she
cannot connect to any
computers on her local subnet even when using
their IP addresses. Seated at her computer, you
ping 127.0.0.1 and receive a reply. Other users
on her subnet do not report having any trouble.
All client computers on the network are WINS-
enabled. What is the most probable cause of the
problem?
Answer - The subnet mask on the Windows 95 computer is incorrect.
79. How a third DNS Server to function as a Backup server in an enviro
nment
where there are already two DNS Servers acting as Primary and Secondar
y?
Answer - Caching-Only Server
80. What do you use to monitor jobs on a NT server?
Answer - LPQ
81. You don't want to have trap messagees from unauthorized SNMP Hosts
.
How will you configure the SNMP agent workstation?
Answer - Community Name and Accept SNMP packages from these Hosts
82. How will you log on to a Domain controler which is in another doma
in and
for that what entries do you require at your Workstation's lmhosts fil
e? (PDC
and BDC)
Answer - #PRE #DOM entries
83. You plan to use DHCP to assign IP addresses to all Microsoft Windo
ws-
based computers on your network. You want each Windows NT server compu
ter to be
assigned the same unique IP address each time that server is started.
What
should you do?
Answer - Create a client reservation for each server.
84. Dallas: 2 NT servers, 225 NT workstations. 1 Wins server named DAL
.
Seattle: 10 NT servers, 1000 NT workstations. 1 Wins server named SEA.
Link between the two sites is a 56Kbps link. Required results:
SEA's database must be replicated to the one in Dallas(DAL).
Optional results:
DAL's database must be replicated to SEA.
The replication should occur only once a day.
Solution: (has a HORRID TABLE graphic which I cant redraw)
-----------------------
PUSH CHANGES PULL TIME
-----------------------
DAL 50000 SEA 24hrs
-----------------------
Answer - The proposed solution does not produce the required result.
(updates every 50000 changes are impossible for replication)
85. Kevin want to set up a windows NT server computer as a static
multihomed router
Answer - enable IP forwarding
assign each IP address different subnet address.
86. You use DHCP to assign IP address to 3 NT servers. You want each s
erver to
be assigned the same IP address each time that server is started. What
information should you supply?
Answer - IP address
hardware address
87. Seven subnet. You plan to use DHCP to assign IP address to all cli
ent
computers. You want to specify the IP address of your company's two DN
S server
on each client computer regardress of which subnet the client computer
is
located on. How to configure DHCP ?
Answer - global option
88. You are configuring DHCP relay agent on a windows NT server. Which
information?
Answer - the IP address of DHCP server
89. RAS connection and want to do encryption?
Answer - PPTP and MSCHAP
90. drag/drop (TCP/IP printing)
4 type of equipment:
TCP/IP printer
NT Workstation
NT Server
Unix host with printer
background info: you need to be able to centrally manage the printer a
nd also
be able to manage jobs from either the NT workstation or UNIX machine
etc.
Answer - NT Workstation installed with LPR, LPQ
NT Server TCP/IP printing
Unix host with printer LPD
91. drag/drop
Subnet A: PDC
Subnet B: BDC
Subnet C: WINS server
Identify the type of browser for each server.
Answer -
Subnet A: PDC Domain Master Browser
Subnet B: BDC Master Browser
Subnet C: WINS server Master Browser
92. Your company network includes several UNIX computers that are runn
ing the
rsh daemon. You want to execute a command on one of the UNIX computers
from
your Windows NT computer.
Which utility must you use?
Answer - rsh.exe
93. Which of the following are valid IP addresses, and which are not?
(A drag
and drop problem)
Answer- 203.122.153.1 (Valid)
127.96.185.20 (Invalid...Starting octet cannot be 127)
150.206.256.3 (Invalid...An octet cannot exceed the value 255)
175.207.180.6 (Valid)
94. Match the following topics with its definition.
Client Reservation ______
Scope Option ______
Global Scope Option ______
Exclusions ______
DHCP Relay Agent ______
a. Changes made here affect all scopes available in the DHCP Server
b. Changes made here affect only the highlighted scope.
c. Used when you have a Static IP address reserved, so that no other
DHCP
clients can use that scope.
d. Intercepts DCHP broadcasts and forwards the packets to the DCHP ser
ver
e. This option in DCHP scopes is Used when you have previously used IP
addresses or have Unix boxes
Answer - c , b , a , e , d
95. Match the words with the definitions.
NBTSTAT ______
NETSTAT ______
TRACERT ______
IPCONFIG ______
NSLOOKUP ______
ROUTE ______
a. Examines entries in the DNS database that
pertain to a particular host or domain
b. Displays protocol statistics and current
TCP/IP connections using Netbios, also display
the Netbios name cache
c. Displays protocol statistics and current
TCP/IP connections since the server was last
booted
d. Used to determine what route a packet takes
to get from the source to the destination
e. Displays windows IP configuration settings
f. Displays and edits static routing tables.
Answer - b,c,d,e,a,f
96. Match the following terms with its
definition(drag and drop)
Primary DNS server ______
Secondary Name server _______
Caching only server ______
Cache file ______
SOA record ______
Reverse Lookup file ______
Forwarder ______
Answer -
*Primary Name Server---Responsible for name
resolution for a "zone". Any
changes in configuration to the Primary Name
Server is automatically replicated to the
Secondary Name Server.
*Secondary Name Server--Maintains copy of zone
information that it receives from the primary
server or a secondary server. Provides
redundancy and reduces the load on the primary
name server
*Caching-only server--Does not keep a permanent
zone list. Caches resolved queries so it can
resolve a second query to the same name
immediately. Useful when placed at the ends of a
slow Wan connection, because they can answer
resolver requests but do not require zone
database transfers.
*Cache File--Contains the IP addresses of the
root name servers in a file named cache.dns
*SOA Record--contains the 3 types of resource
records, which are CNAME, MX, and PTR
*Reverse Lookup-records are used for IP address
to name resolution in reverse lookup zones (in-
adda.arpa)
*Forwarder--Picks up broadcasts from clients and
sends them to the DNS server
97. Viol8r is connected to a remote host via FTP
when his session appears to stop responding.
What command should Viol8r use to check the
connection?
Answer - Netstat
--
※ 来源:．月光软件站 http://www.moon-soft.com．[FROM: 210.77.160.86]
|
|