发信人: bok()
整理人: reynolds(1999-10-13 09:15:23), 站内信件
|
1: A user wants the option to print large jobs after hours. How can th
is be done?
A: Create two printers
Give one the option to print after hours.
Note: This question will either request the option to print after hour
s, or require users to print after hours. Two different answers! Make
sure if question requires the option, you give users the option, and v
ice versa.
2: You are tasked to setup up 80 identical workstations and 20 identic
al notebooks. You must install Windows NT Workstation 4.0 and WordPerf
ect on all 100 computers. All the computers will be clients in a singl
e domain, Sales.
Required result: You must automate the process of installing Windows N
T Workstation 4.0 on all 100 computers.
Optional results: You want to automate the process of installing WordP
erfect on all 100 computers. All 100 computers should join the Sales d
omain during the installation of Windows NT Workstation 4.0.
SOLUTION
Create two answer files and two UDF files.
In the [Unattended] section of the answer files add the line:
"OemPreinstall=Yes"
In the [Network] section of the answer files add the line:
'tjoin Domain=Sales"
Use Windiff exe Isnap to take a snapshot of the reference computer.
Install the applications (Windows NT Workstation 4.0 & WordPerfect) on
the reference computer
Use the Windiff exe Idiff to create the difference file, then use Wind
iff exe apply to run the difference file.
Start the installation process by using the "winnt.exe" command with t
he appropriate answer files and UDF files.
Which results does the proposed solution produce?
A: The proposed solution does not produce the required result or any o
f the optional results.
3: You must print to a NetWare printer. How do you disable the blank p
age at the end of each print job?
Answer From within CSNW, deselect Add Form Feed.
*Note that if the blank page contains only your user name, etc, that i
s a banner page, not a form feed!
4: RAS server with 3 modems and Multilink enabled. Administrator imple
ments Callback Security on the server. How does it work?
A RAS server recalls with three different telephone numbers.
B RAS server recalls with one telephone number.
C RAS server recalls with two telephone numbers only
D It doesn't work
Answer: D (Multilink cannot be used with callback security unless ther
e are two (or more) modems configured on the same phone number.)
5: How can you implement security on your Workstation after 15 minutes
of inactivity?
A: Enable a screen saver with a password
6: You must optimise your Workstation. The requirement is to speed up
access to your hard disks and files?
Proposed Solution:
A: If the solution offered is to create a Volume Set, then it will not
produce required result Volume sets do not speed up access.
7: What protocol do you need to use a MAC printer?
A. Apple-talk
8: A system policy is set for a group with 50 members. 3 users do not
notice any changes. Why?
A: The 3 users have an individual system policy, which overrides group
policies.
9: What is the smallest activity that can be scheduled by the processo
r?
A: A thread.
10: You are running three integrated Windows16-bit applications on you
r Windows NT Workstation computer. These applications use shared memor
y blocks to communicate with each other. When one of the three integra
ted applications halts, it stops the execution of all 16-bit Microsoft
Windows-based applications that are running. You want to continue usi
ng the three integrated applications, but you want to keep them from i
nterfering with other 16-bit applications. How can you do this?
A Run the one application that halted in a separate memory space. Run
all of the others in the default memory space.
B Run the three integrated application in the default NTVDM, Run all o
thers in a their own NTVDM.
C Run each application in a separate memory space.
D Run each of the three integrated application in its own separate mem
ory space. Run all others in the default memory space.
Answer: B
11: You have a Workstation dual booting between NTWS and DOS with one
FAT partition. How do you remove NT?
A: Boot to DOS. Run SYS. COM and remove all NT files.
12: You want to install your networking protocols, however you do not
yet have a network adaptor card. What can you use?
A: Use the MS-loopback support driver.
13: Where would you install a sound card with MIDI support?
A: Select the Multimedia icon from within Control Panel
14: What two utilities can you use to see memory utilisation?
A: Task Manager and Performance Monitor
15: Which of the following is used to search for the value of a key in
the registry?
A regedit.exe
B regedt32.exe
C Poledit.exe
D System policy editor
Answer A
* The main difference between regedit and regedit32 is that 32 can onl
y search for keys in the registry, and regedit can search for strings,
values, etc
16: How can a user share a directory on his Workstation?
A: Log in as administrator and share the directory-using Explorer
17: How can a Workstation join a domain during installation?
A: You must use an administrator name and password
18: After restarting Windows NT Workstation, monitors show a blank blu
e screen without text and the computer stops responding. You discover
that an incorrect driver was just installed. What should you do to cor
rect the problem?
A Call the manufacturer to request an NT compatible driver
B Use the Last Known Good Configuration to restart your system and cor
rect the problem.
C Use the emergency repair disk
Answer: B Remember: If it's recent changes to the machine that caused
the problem, you can usually fix it with LKGC.
19: How do you give a user who is taking over from a retiree all the r
etiree's previous permissions?
A: Rename the account to the new user and reset the password
20: How do you change a password on a Netware server?
A: Use "setpass" for 3.x and CTRL-ALT-DEL for NDS. NetWare (Directory
Services)
21: What is required to have TCP/IP addresses configured dynamically a
nd automatically?
A: DHCP (Dynamic Host Configuration Protocol)
22: You have an NT Workstation connected to 2 routers, you want the NT
Workstation to be able to route, which of the following do you have t
o install:
A IP
B Subnetmask
C Default Gateway
D DHCP
Answer: A, B, C
*Note, if not routed, all you need is IP and subnet mask.
23: What Control Panel applet is used to configure modems?
A: By selecting the Modem Applet in control panel
24: What two things do you need to print to a TCP/IP printer on a netw
ork?
A Hostname + IP-address
B Hostname + subnetmask
C IP-address + printername
D Printername + hostname
Answer: C
25: What protocol/service do you need to send TCP/IP trap messages to
another computer?
A SNMP
B Simple TCP/IP services
C NWlink
D Network monitor agent
E DHCP
Answer: A
26: One computer used by three users. They want their files securely a
nd own their individual desktop setting. What THREE steps must you do
for them?
A Create one account for each user
B Create one account for three user to share
C Create one profile for each user
D Create home directory for each user on NTFS partition.
E Create home directory for each user on FAT partition.
F Create home directory for each user on HPFS partition.
G Set permission to each user to let them exclusive access their own h
ome directory.
Answer A D &G
27: There are 20 laptop computers and 50 desktop computers. You want t
o install NT workstation 4.0 and five applications on them.
Required: Auto install NT
Optional: Auto install applications
Join them to domain CORP
Solution: Create one SETUP.INF.
Create UDF file for them.
Install one computer with NT. Run Sysdiff.exe /snap. Install five appl
ications. Run Sysdiff.exe /diff to create diff file.
Install all the other computers with the Unattended.txt file.
Use Sysdiff.exe /apply to auto install applications.
a. Solution meets the required and all the optional.
b. Solution meets the required and only one the optional.
c. Solution meets the required and no optional.
d. Solution does not meet the required.
I keep my eyes huge to search TWO unattended.txt files or ONE. After m
y several times skimming. I found the words "ll computers the unatte
nded.txt file" (CAUTION not "files"). So I think there is only one una
ttended.txt. I choose d.
28: One Lan that has both novell and NT servers. 1 workstation running
NT 4 - what two protocols do you need to install so that the workstat
ion can use the resources on both servers.
1. TCP/IP
2. Nwlink
3. CSNW
4. GSNW
Answer 1 & 2
Note: Watch out for the word protocol. CSNW and GSNW aren't protocols!
Also, remember that with only NWlink, your NT client can still access
client/server apps on the NW server, without CSNW being installed. Ins
talling CSNW enables your NT client to access file and print shares on
the NW server.
29: Situation (Long): You are planing to reconfigure an NT Workstation
with 32 MB RAM for optimum speed of access to its local (mainly graph
ic data) files for other computers in the same LAN. You have there a S
CSI controller with 4 disks of 2 GB each.
Required result: To optimise performance for optimum speed of access t
o local data files.
Optional results: Reconfigure for optimum speed of access to paging fi
le. Optimise network access performance.
Proposed solution: Configure the first hard disk as boot partition. Co
nfigure the other 3 disks as a strip Set. Use NTFS on all partitions.
Place data on the strip Set. Place paging file strip Set. Configure or
der of protocols at bottom The solution produces:
A The required result and 2 of the optional results. [
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results.
Answer B
30: The printing job of Invoices is sent to a printer and it jams in b
etween. The program will not allow to re-submit the job to the printer
, what you will do to rectify this problem?
A) Select resume from document menu
B) Select restart from document menu
C) Select cancel from document menu and then restart
D) Select refresh from view menu and then resume
Answer B
31:Installing NT Workstation with NT Server stores the files. Which 3
files do you need?
A.Setup.inf
B.UDF
C.sysdiff
D.unattend
E.windiff
F.Poledit
Remember one thing, there is not any kind of Setup.inf bullshit thing
in any kind of unattend installation in NT, that thing is only to trap
you, in above question the installation files are on NT SEVER, so it
doesn't make any difference, where ever the installation files are. On
ly you need B, C&D (unattend udf & sysdiff).
32: Which three files to use when performing unattended installation w
ith identical applications installed?
Answer UDF, sysdiff.exe and answer file
33: You want to automate the installation of 20 laptops and 50 PCs.
Required: Automate the installation of applications on 70 computers
Optional:
Automate installation standard suit of win32 based application
You want to configure all computers to join CORP domain during install
ation
Solution. -
2 answer files, 1 UDF, use Windiff
A The required result and 2 of the optional results. [
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results
Answer D (because u need 2 answer files to automate installation on 2
different kind of computers means laptop and desktop, so u need 2 answ
er files, one udf file for computer specific or user specific informat
ion and sysdif.exe for to automate the installation of applications. R
emember not windiff.exe)
34: You want to automate the installation of 20 laptops and 50 PCs.
Required: - Automate the installation
Optional: - Automate installation of apps. Make it join a domain durin
g installation
Solution.
Create an unattend file with the appropriate lines included to join th
e workgroup for both platforms.
Create a udf file. Use sysdiff to make a difference file. Apply the di
fference file.
A The required result and 2 of the optional results. [
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results
ANSWER: D (DOES NOT MEET REQ RESULT)
You need 2 UNATTEND.TXT, one UDF and one SYSDIFF.EXE
35: -You need to install Windows NT Workstation on 35 identical new la
ptop computers and on 55 identical new desktop computers. They will al
l be members of a domain named SALES.
Required Result:
You must automate the installation of Windows NT Workstation on the co
mputers.
Optional Desired Results:
You want all of the computers to join the SALES domain during the inst
allation process. You want to automate the installation of a standard
suite of applications on all the computers.
Proposed Solution:
Create one Setup.inf file to be used for all computers. Create one Uni
queness Database file(UDF) that contains the unique hardware configura
tion options for each computer. Install Windows NT Workstation on one
computer.
Use Sysdiff.exe to take a snapshot of the system, install the suite of
applications on this computer, and then use sysdiff.exe again to crea
te a difference file.
Automate the installation of NT Workstation on all of the other comput
ers by using the Unattend.txt file and the appropriate portions of the
UDF. Automate the installation of the suite of applications on all of
the other computers by using Sysdiff.exe and the difference file that
was created earlier.
A. The proposed solution does not produce the required result.
B The proposed solution produces the required result and both of the o
ptional desired result.
C The proposed solution produces the required result and only one of t
he optional desired result
D The proposed solution produces the required result but does not prod
uce either of the optional desired result.
Answer: Proposed solution does not produce the required result. You ne
ed two unnattend.exe files
36: -You are installing Windows NT from a CD-ROM. You get the followin
g message "copysinglefile, non-critical error, could not copy file" Wh
at could be the problem?
A Your disk is full
B The CD-ROM is not on the HCL list
C The file already exists
ANSWER: -B.
37: -Your NT Workstation 3.51 computer has a 33 MHZ, 386 processor and
16 Megabytes of RAM. You want to upgrade the computer to NT Workstati
on 4.0, and you want all of the application settings to be the same in
Windows NT Workstation 4.0 as they were in Windows NT Workstation 3.5
1. How should you install Windows NT Workstation 4.0?
A Install NT Workstation 4.0 in the same directory and choose the Upgr
ade option, then backup all data files. Repartition and format the har
d disk, and then install NT Workstation and all applications. Customis
e the user's profile settings and restore all data files.
B You cannot successfully upgrade this computer to Windows NT Workstat
ion 4.0.
C Install NT Workstation 4.0 in a different directory than Windows NT
Workstation 3.51. Manually reinstall all applications and recreate all
of the user's profile settings.
D Install NT Workstation 4.0 in a different directory than Windows NT
Workstation 3.51. Use convert.exe to migrate all of the application se
ttings and users profile settings to NT WS 4.0
Answer: B. You need a 486 for workstation
38: When selecting msdos on a dualboot-machine you get an error " non-
system disk or disk error"
ANSWER: - Bootsect.dos is missing or corrupt.
39: You want to set the boot delay time to 10 seconds. How should you
proceed? Choose all that apply
A Edit Boot.ini to set timeout to 10 seconds
B Use Control Panel | System Properties | Startup - Shutdown tab
C Use system properties
D Edit HKEY_CONFIG in the registry
Answer: A, B
40: Choose two utilities to monitor processor activity
A Windows NT Diagnostics
B Event Viewer
C Task Manager
D Performance Monitor
Answer: C & D
41-How to create a dumpfile if an application crashed. (They show you
2 screenshots of Dr. Watson and the System-applet. You have to put a c
rosshair on the correct position)
Answer Place it on 'create crash dump file 'in Dr Watson
42: -What would you enable to record a memory dump following an applic
ation failure? You are supposed to place a target with crosshairs on t
he correct area
Answer Create crash dump file On Dr. Watson window
(Remember application crash dumps are done in Dr. Watson, system stop
errors and memory dumps are done in FAULTLOG on the Startup/shutdown m
enu.)
43: - Your computer has NT 3.51 and uses HPFS. How do you install NT 4
.0 and preserve security?
Answer: Convert to NTFS and install NT 4.0.
44: How do you start the command "ntbackup /r /e" with low priority?
A net start /low ntbackup /r /e
B start /low ntbackup /r /e
C cmd /low ntbackup /r /e
D run /low ntbackup /r /e
ANSWER: - B.
*You may see this question ask for low and minimised... in which case
it would be
start /min /low ntbackup /r /e
45: On your workstation you have installed TCP/IP protocol, you want f
tp on your workstation, what you have to install on your workstation t
o enable FTP?
ANSWER: - PEER Web services.
46: Configuring Dial Up Networking (DUN) to connect to an ISP. How to
establish an IP address for your machine?
A The account will use your default IP address already established
B Connect to ISP's PPP server and request an IP address
C Configure the IP address in the phonebook entry of the DUN configura
tion
Answer is B. Because when you use Dial-up-networking to connect your i
nternet service provider's (ISP) server then you have to use that IP a
ddress which is provided by your ISP's server.
47: You have an NT Workstation connected via Internet to an NT Server
that has a DNS name of "sales.datum.com" and a printer with the name "
reports". How do you refer to the resource in order to map it?
ANSWER: - \\sales.datum.com\reports
48: You want to allow your windows NT workstation computer to resolve
Unix host names to IP addresses on your corporate intranetwork.
Which TCP/IP option should you configure?
A Scope ID
B default gateway
C The IP address of DNS server address
D BOOTP server address
Answer C DNS resolves host names to IP addresses
49: Most of the client workstations use NetBEUI protocol to communicat
e with Server.
You want to increase the network performance. Where the binding order
would you change?
A In Server in >>>>Network->Binding->Server->NetBEUI on the top
B In Server in>>>>Network->Binding->Workstation->NetBEUI on the top
C In Workstation in>>>>>Network->Binding->Server->NetBEUI on the top.
D In Workstation in>>>>Network->Binding->Workstation->NetBEUI on the b
ottom
ANSWER: - C.
50: You installed Client Service for NetWare on a Windows NT workstati
on. Which networking tasks can be performed from the computer? (Choose
all that apply)
A Allow NetWare client computers to use shared directories and printer
s on your NT WS computer.
B Connect to volumes or directories on a NetWare Server.
C Connect to print queues on a NetWare Server.
D Connect to NetWare 4.1 volumes on servers that do not run bindery em
ulation
E Run the NetWare 3.12 syscon utility from your Windows NT WS computer
F Run NetWare login scripts during the logon process.
G Function as a Gateway to the NetWare server for other Windows NT WS
computers that do not have CSNW installed.
ANSWER: - B, C, D, E, and F.
Note: A can't be done unless FPNW has been installed.
F just mark the checkbox in CSNW applet, and you can run NetWare login
scripts
D is correct, because NT4 is able to work in either the NDS environmen
t
(NetWare 4.x, no bindery emulation) OR with NetWare 3.x (which does us
e bindery emulation).
51: You want to access an oracle database running on a netware server.
What must be loaded on your workstation?
ANSWER: - NWlink IPX/SPX
52: -DAVIDL is a member of users group and wants to share a FAT folder
from his machine running NTW. How he can share it, so that Everyone s
pecial group will get read permission to that folder?
A Login as Administrator, go to Windows NT Explorer, right click the f
older, share it & assign the permission
B Login as DAVIDL, go to Windows NT Explorer, right click the folder,
share it & assign the permission.
C Login as DAVIDL and use User Manager .to change the share permission
's
Answer A Remember.... Only the Admin or a poweruser can create shares
53: -Your computer is member of a workgroup. You want to map a network
drive to a share on a server PDC in the XYZ domain. The server has ha
d the guest account disabled. Choose two options.
A Log on to your workstation using your domain user account
B Log on to your workstation using the account of a domain member
C In the log on box choose the domain name
D In the map network drive box in explorer choose "log on using accoun
t" option
E In the map network drive box in explorer choose "connect as" option
Answer: A, E
54: -NT Workstation - member of workgroup RESEARCH. You want to map a
network drive on your computer to a NT Server in the CORP domain. The
Guest account is disabled in the CORP domain. How would you do it? (2
choices)
A Log onto NT Workstation computer with username from the CORP domain
B Log onto NT Workstation computer with the same username you would us
e to access the NT Server computer
C Select CORP from the Domain drop-down list box in the logon info dia
log box
D Select Connect As in map network drive and enter the username of an
account in the CORP domain
Answer: - A, D.
55: - Setting up a replication account and you attempt to log on after
wards and an error appears and you are not allowed to log on. why ? Pi
ck 2
A You don't have permission to log on as a service.
B You are not the Administrator.
C You are not in the server operators group.
D You failed to change the password.
Answer A and B PLEASE CHECK AS I AM UNCERTAIN WITH THIS ANSWER!
56: -System Policy and Roaming Profile. What takes precedence?
A System Policy
B Roaming Profile
C Least restrictive combination of the two
D Most restrictive combination of the two
Answer A a system policy takes precedence
*Policies over Profiles.
User Policy over Group Policy.
Machine/System Policy over all.
57: What to do in order to add a path to an environment variable for a
user application?
Answer Go to the System applet in the Control Panel, pick Environment
tab, User Environment and add the variable and path value as the user
logged in.
58: -How do you stop the printer from printing a blank page between pr
intouts?
ANSWER: -Remove the separator page option. Just remember the word 'SEP
ARATOR'?
59: How do you run 16-bit application to be more responsive than other
s do.
Answer Run application with HIGH priority.
60: What happens when you run 16-bit windows based application in its
own memory space? Select 2.?
A Application runs at higher priority
B Application can be preemptively multitasked
C Application uses less system memory
D Application cannot interfere with execution of other 16-bit windows
based apps running at the same time.
Answer B & D
61: -You install a 32-bit application that is designed for Windows NT
Workstation4.0. This application will use your computer modem. What ca
n you use to configure the modem so that it can be used by the new app
lication?
A the Add/Remove programs properties dialog box from Control Panel.
B From the modems properties dialog box from control panel
C the Dialing properties dialog box from control panel
D the Adaptors page of the network dialog box from Control Panel
ANSWER: - B
62: You have several DOS program you want to run under NT. You need to
run a TSR that controls the COM port for these DOS program. How do yo
u run MS-DOS the Terminate and Stay Resident (TSR) application?
A Start it before NT loading
B . Start it in the default NTVDM
C . Start it in separate NTVDM
D . Start it using Autoexec.nt
Answer: D (Please verify this answer)
63: Situation (Long): You are planing to reconfigure an NT Workstation
with 32 MB RAM for optimum speed of access to its local (mainly graph
ic data) files for other computers in the same LAN. You have there a S
CSI controller with 4 disks of 2 GB each.
Required result: To optimise performance for optimum speed of access t
o local data files.
Optional results: Reconfigure for optimum speed of access to paging fi
le.
Optimise network access performance
Proposed solution
Configure the first hard disk as boot partition. Configure the other 3
disks as a Volume Set.
Use FAT on all partitions. Place data on the Volume Set. Place paging
file on the boot partition. Configure binding order of protocols so th
at most used protocols are at the bottom of the binding order.
The solution produces:
A The required result and 2 of the optional results.
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results.
Answer D Volume sets DO NOT increase performance
64: Your network has 15 workstations and one Windows NT Server compute
r that is configured as a Primary Domain Controller (PDC). Five of the
workstations run Windows NT Workstation and 10 of them run Windows 95
. You plan to install a new Intel-based computer on your network. Dona
ldT, the company president will use it, and other employees will use i
t when he is not using it. You need to plan for security and choose an
operating system for the new computer.
Required Result:
Allow DonaldT to secure files and directories on the new computer so t
hat other users can access only the files and directories to which Don
aldT has assigned rights to those users.
Optional Desired Results:
Allow users other than DonaldT to manage security on only files and di
rectories they have created. Allow DonaldT to control access to the ne
w computer's files, directories and shares by using user accounts and
group accounts from the domain.
Proposed Solution:
Install Windows NT Workstation on the new computer and configure it to
be in a workgroup named EXEC. Configure the new computer to use NTFS.
Rename the administrator account to DonaldT. Remove all users and gro
ups other than DonaldT from the Administrators local group on the new
computer.
Which results does the proposed solution produce?
A The required result and 2 of the optional results.
B The required result and 1 of the optional results.
C The required result and none of the optional results.
D None of the required results
Answer The proposed solution produces the required result and only one
of the optional desired results.
65: You are installing NT and testing the monitor type and the screen
goes black. When you reboot you are put back into the monitor type sel
ection screen. What is the problem?
A Refresh rate
B Resolution
C Monitor type
D Color depth
Answer: C
66: What is needed to print to a HP printer on the network?
Answer DLC protocol
67: You are creating and sharing a new printer on your NT workstation
4.0 Users of Windows 95, workstation 3.5.1 and workstation 4.0 will al
so use this printer. You need to install printer drivers. What should
you do to accomplish this with a minimum of administrative effort?
A Install appropriate drivers on every computer?
B Install 4.0 drivers on your computer Install 3.5.1 drivers on workst
ation 3.5.1 computers Install Windows 95 drivers on Windows 95 compute
rs
C Install workstation 4.0 and 3.5.1 drivers on your computer Install W
indows 95 drivers on Windows 95 computer
D Install 4.0, 3.5.1 and Windows 95 drivers on your computer
Answer: D
68: Windows NT will boot on your computer with a boot disk, but not on
Bill's computer. What is the problem?'
Answer Change the ARC naming in the boot.ini file to the proper partit
ion
69: What do you need to monitor Ethernet packet statistics?
Answer Network Monitor Agent
70: What is required to use performance monitor to monitor your networ
k segment?
Answer Enable the Network Monitor Agent
71: You want to install NT Workstation from CD-ROM. MS-DOS can access
the CD-ROM but not by NT Workstation. How would you install NT Worksta
tion?
Answer Start from MS-DOS and run WINNT.EXE from the CD-ROM.
72: You have a computer with a NIC at the office and a modem when you
take it home. How would you configure it?
Answer 2 different hardware profiles
73: How should you use an unattended.txt file (answer file) during the
automated installation of a Windows NT Workstation on 100 identical n
ew computers? (Choose one)
A To provide hardware-specific configuration information and other con
figuration data for the computers.
B To provide user account information, a unique computer name, and a u
nique identifier specific to each computer.
C To automate installation of applications on the computers during the
installation of WinNT WS.
D To place application specific registry data into the registry on eac
h computer including serialisation and registration data.
Answer: A Remember, answer file is for config and hardware, Sysdiff is
for apps
74: You install a tape backup device that uses the Enhanced IDE interf
ace. In which dialog box from the control panel must you install the t
ape backup device driver? (Choose one)
A SCSI adaptors
B Devices
C System Properties
D Tape Devices
Answer: D Tip - Learn the names of the icons in Control Panel! Many qu
estions are dead give aways if you know this, even if you don't know w
hy. Incorrect choices on this sort of question are usually items/icons
that don't exist!
75: Peter Smith wants to install Windows NT Workstation without user i
nvention. He plans to do this by running winnt.exe with the /u switch.
Which additional file must he use? (Choose one)
A Uniqueness database file (UDF).
B An unattended.txt file (answer file).
C A customised setup.sif file.
D A customised Setup.inf file.
Answer: B
76: You suspect that someone is gaining unauthorised access to the com
puters on your network. You enable auditing of user login events. When
you look at the Eventviewer security log three days later, you see th
at every account has more than 100 failed logon attempts before each s
uccessful logon. You also note that all the logon attempts on each acc
ount occurred within one minute. You want to prevent further unauthori
sed logons. What must you do in the Account Policy dialog box? (Choose
one)
A Select the Account lockout radio button.
B Set a value in the spin control in the Maximum Password Age group.
C Set a value in the spin control in the Minimum Password Age group.
D Set the spin box control in the Password Uniqueness group to remembe
r the 10 last passwords.
Answer: A
77: You want to send a document from your Windows NT workstation compu
ter to a printer that is located on another Windows NT WS computer. Yo
u want to do this without permanently installing drivers for that prin
ter on your hard disk. What should you do? (Choose one)
A Use "net print" to send the document to the printer.
B Drag and drop the document files onto the printer in Windows NTexplo
rer.
C Use Windows NT Explorer to temporarily capture the printer, and then
send the document to the printer.
D Use the Add Printer Wizard to temporarily connect to the printer, an
d then send the document to the printer.
Answer: B
78: You wish a user to be able to view Event Viewer Security Log how c
an you achieve this?
A Only Administrators can view Event Viewer, so add user to Administra
tors group.
79: What is the smallest unit handled by the schedular service?
A Process
80: The NT Workstation Administrator password was lost. What will happ
en after restoring with an Emergency Repair Disk (ERD)?
Accounts and security will be restored to, as they were the last time
the ERD was updated.
81: Which application creates user accounts?
Answer User manager
82: The default memory for 16 bit windows applications is what?
Answer Shared
83: You notice excessive paging, how do you correct this?
A Add more RAM
B Add a second processor
C Increase the size of the paging file
D Decrease the size of the paging file
E Create a second paging file
Answer: A
84: Startup fails; you suspect a problem in the boot sector what shoul
d you do?
Answer Use 3 Startup disks and select repair *Key here is that the pro
blem is in the boot sector. Boot sector corruption can be repaired by
the 'repair' option in install.
85: What does WINS do?
Answer Translates NetBIOS names to IP addresses.
*Remember that WINS is specific to Microsoft, and DNS can be used with
UNIX boxes.
86: You want to replace Windows 95 by Windows NT Workstation 4.0 on so
me user's computers. They all want to keep their Windows 95 desktop se
ttings and all their applications. How should you proceed?
A Run Winnt.exe and Install Windows NT in the same directory as Window
s 95
B Run Winnt32.exe and install Windows NT in the same directory as Wind
ows 95
C Run Winnt.exe and install Windows NT in a separate directory, reinst
all all the applications and reconfigure user environment under Window
s NT, then remove Windows 95
D Can't be done because Windows 95 and Windows NT have different regis
try configurations.
Answer: C
*Remember that there really is no way to 'upgrade' from Win95 and save
all user settings. Win 3.x and earlier versions of NT can be upgraded
.
87: Your computer runs only Windows NT Workstation on an NTFS partitio
n. You would like to remove Windows NT and run MS-DOS. How would you d
o it?
A Run Sys.com
B Use convert.exe to convert the partitions to FAT, then run Sys.com
C Use Rollback.exe to restore MS-DOS
D use fdisk.exe to remove all the partitions, then use the MS-DOS setu
p disks to reinstall MS-DOS
Answer: D
88: You have 2 ISDN adaptors with 2 B-channels each on your NT Worksta
tion. Each channel has its own phone number. You are connected via RAS
to an NT Server with the same configuration. How do you configure RAS
connecting with 2 ISDN lines each having 2 B channels?
A Create one phone book entry with 4 numbers
89: You want an NT Workstation to dial-up to a PPP Server, and after l
ogin into the PPP Server you need to activate a Menu automatically for
that user account.
Answer Create a script to run after dialling
90: You want to run some accounting applications at a higher priority
without interfering with the operating system or any of its services.
Which process priority class should you use for the accounting applica
tions?
Answer High.
91: A week ago success and failure print auditing was configured for t
he Everyone special group on a NT Workstation printer. Since then, abo
ut 300 documents have been printed, but no events were logged. What su
ccess/failure audit should you enable?
Answer In user manager enable auditing of File and Object Access
92: You have to administer 90 NT Workstations. Accounts are maintained
by a PDC that is the only server on the network. Users log on using a
ccounts from the domain. You want to implement restrictions on the NT
Workstations so that the "Shut Down" option is disabled in the login d
ialog box. Least administrative effort.
A Use a system policy
B Change the registry value of Shut Down Without Logon from 1 to 0.
Answer: A Both will work, but A if least administrative effort.
93: You need to install UPS that is listed in the HCL for your Windows
NT Workstation. What are the 2 steps to install it?
A. Connect UPS to any serial port with a pin that meets the UPS connec
tion requirements.
B Use the UPS dialog box from the Control Panel
Answer: A, B.
94: You require a Windows NT Workstation to become a member of the COR
P domain. What should you do?
Answer Control Panel, Network, Identification
95: You want to move an NT Workstation from DOMAIN1 to DOMAIN2 not cha
nging any other settings. What to do?
Answer Control Panel, Network, Identification
* Same as above - this is how you change domains!!!
96: Why would you use SYSDIFF.EXE on an NT Workstation to setup other
300 identical computers with the same applications?
Answer to automate installation of applications during the installatio
n of the 300 NT workstations. (Instead of configuration of hardware)
97: It is necessary to install NT Workstation with a set of applicatio
ns on over 100 identical new computers and you want to automatically i
nstall all applications. What to do?
Answer Install first NT Workstation, run sysdiff /snap, install apps,
run sysdiff /diff to create the difference file. Install to rest and a
pply diff file.
98: Every time that you use Dial-Up Networking to connect to a Remote
Server, the computer disconnects after 3 seconds. What to do in order
to trace the problem?
A User Dial-Up Networking Monitor dialog before you dial.
B Record a log file check box in Advanced connection settings dialog b
ox
Answer: A
99: BruceO has an account on a NetWare Server 3.12-named Accounting an
d an account BruceO on his NT workstation 4.0. How do you configure CS
NW on his workstation?
A . Preferred server Accounting
B Preferred server BruceO.Accounting
C Tree Accounting
D Tree NetWare
Answer: A
* NetWare 3.x (bindery emulation) = Preferred Server
NetWare 4.x (NDS) = Default tree and context
100: Boot error - NTOSKRNL is missing or corrupt. Fix?
Answer Edit ARC path in boot.ini, or use ERD to repair
101: Boot error - NTLDR is missing. Fix?
Answer If there's a non-system floppy in the drive, eject it and reboo
t.
If boot.ini is not present, replace it from a backup or use ERD to rep
air.
If NTLDR is actually missing or damaged, repair from ERD.
102: Boot error - NTDETECT keeps repeating. Fix?
Answer Must use ERD to repair.
103: Account policy specifies max password age is 60 days. You later c
reate a new user account and check the 'password never expires' box. W
hat happens?
Answer Password will never expire.
104: The process of managing which pages are stored in RAM, and which
are stored in the paging file is called:
A. Virtual Memory
B. Paging
C. Demand Paging
D. Page Swapping
Answer. C
If there is not enough unused physical memory available when an applic
ation attempts to store data in memory, the VMM uses demand paging to
find pages of RAM not recently used. It copies these pages to the page
file.sys.
105: You have started a Win16 application (APP1) in a separate memory
space. Later you start another Win16 application (APP2) and an MS-DOS
application (DOS1). APP2 hangs and stops responding. How does this aff
ect the APP1 and DOS1 applications?
A. APP1 and DOS1 are not affected and will continue running normally.
B . APP1 will stop responding but DOS1 will continue running normally.
C . DOS1 will stop responding but APP1 will continue running normally.
D . APP1 and DOS1 will stop responding.
Answer A
Because APP1 is running in its own memory space, it is not affected by
the crash of APP2. MS-DOS applications always run in their own NTVDM
and are therefore not affected by faulty Win16 applications
106: You are running several small applications simultaneously on your
Windows NT Workstation. One of the Win16 based applications stops res
ponding. How can you shut down this application without affecting all
of the other Win16 or Win32 based applications?
A. Do nothing. NT automatically purges unresponsive apps from the syst
em.
B. You can't. Faulty Win-16 based apps hang the system. The computer m
ust be restarted.
C. From Task Manager, select the application that is not responding an
d click End Task.
D. From Task Manager, select all of the pertinent processes and end th
em.
Answer C
To close an application that is no longer responding, you must use tas
k manager and end the task.
107: Under Windows NT, network adaptor card drivers must be _____ comp
liant in order to be bound independently to several protocols.
A. NDIS
B. ODI
C. NE 2000
D. TDI
Answer A
With NDIS, one or more protocols can be bound to one or more network c
ard drivers. ODI is the Novell equivalent to NDIS and also allows more
than one protocol to be bound to a network card.
108: Which of the following services is responsible for providing reso
urces requested by a local application?
A . Redirector
B. Server
C . UNC
D . Multiple Provider Router
Answer A
The redirector is also known as the workstation service.
109: The ______ is a boundary layer that provides a common programming
interface for file system drivers to communicate with the transport p
rotocols.
A. NDIS
B. ODI
C. TDI
D. DLC
Answer C
TDI is the acronym for the Transport Driver Interface.
110. NWlink is a protocol that is compatible with the _________ protoc
ol.
A. NetBEUI
B. IPX/SPX
C. LAT
D. NCP
Answer B
NWlink is Microsoft's implementation of the IPX/SPX protocol suite.
111: Which of the following subsystems provides support for a UNIX app
lication on a computer running NT Workstation?
A . POSIX subsystem
B . UNIX subsystem
C . OS/2 subsystem
D . Win32 subsystem
Answer A
Posix is a standard set of API's for versions of UNIX and UNIX-like op
erating systems. Applications written using these API's can be install
ed and run on an NTFS partition on a Windows NT computer.
112: When you send a print job to a network-printing device, it comes
out illegibly. What is the most likely cause of the problem?
A. Incorrect print driver.
B. Incorrect network protocol.
C . The spooler service is malfunctioning.
D. Incorrect paper size.
E.
Answer A
When an incorrect print driver is installed, print jobs usually come o
ut illegibly. To solve this problem, the print driver must be replaced
.
113:. A user complains that whenever he sends a print job his hard dis
k starts crashing and never reaches the server. What is the likely cau
se of the problem?
A. The spooler service on the server is stuck.
B . There is not enough disk space in the print server.
C . There is not enough disk space for spooling.
D. The workstation is out of RAM.
Answer C
Disk space is always required for spooling. The location of the spool
folder can be edited in the registry under the following key: HKEY_LOC
AL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers.
114: In Windows NT terminology, what is the physical device that print
s a document?
A. Print device.
B. Printer.
C . Print processor.
D . Print pool.
Answer A
A printer is a logical device created in Windows NT. A printing device
is the actual hardware device, which prints a document.
115: You plan to install Windows NT Workstation on all the client mach
ines of your network. However, the information technology department i
s concerned about the licensing strategy for the workstations when con
necting to all three of the company's NT Server computers. What is the
most appropriate licensing mode?
A. Per server licensing.
B . Windows NT Workstation does not require licensing.
C . Per seat licensing.
D . A combination of per server and per seat licensing.
Answer C
Per seat allows a single workstation to only require a single license
to connect to multiple NT servers.
116:. Your boss is concerned because he wants to send a print job to a
n NT Server 4.0 computer but he doesn't have the drivers for his NT Wo
rkstation computer available. What should you tell him?
A. The drivers are located in the Windows NT Workstation CD-ROM.
B . Windows NT will automatically download and install the correct dri
vers.
C . All the device drivers are automatically copied to the DRIVERS$ sh
are in print server.
D . The device drivers are required to install a network printer.
Answer B
There is no need to manually install the device drivers, because Windo
ws NT will automatically handle the installation process.
117:. You want to send a print job to a UNIX workstation running TCP/I
P. What service must you install in your Workstation computer?
A . Install CSNW on your workstation.
B . TCP/IP printing.
C. DLC.
D. File and print services for UNIX.
Answer B
The LPR command will send a print job to a UNIX workstation running a
printing demon.
118: What is the function of the LPQ utility?
A. It is used to send print jobs to a host running TCP/IP.
B. It will delete all documents in the print queue of a TCP/IP host.
C . It will obtain the status of a print queue on a NetWare server.
D. It is used to obtain information about the print queue on a TCP/IP
host.
Answer D
The LPQ command is installed with TCP/IP services. It will retrieve st
atus information from a TCP/IP host running a printing daemon. Note: C
ommunication between the client and the server computer is handled ove
r TCP.
119: You notice that there is too much paging occurring, and also the
% processor usage is constantly 92%. What do you do for the best impro
vement in performance?
A Add a second processor
B Add more RAM
C Create a second paging file
D Increase the size of the paging file
Answer B
120: What is the unattend.txt file used for?
.A Automatic installation of application
B Storage of system specific unique information such as computer name
etc.
C Information about hardware configurations etc.
Answer: C
121: want to capture Packets transmitted to and from your network card
. What do you install?
A Network Monitor Agent
122:your company laboratory, a Windows NT Workstation computer named L
AB1 is used by Kristin, Marvin and Drew. Each of them stores data on L
AB1 in the Lab Experiments folder and its subfolders, which are named
Results1, Results2, and Results3. The Users local group has Full Contr
ol permission's for the entire Lab Experiments folder. The current fol
der structure on the computer named LAB1 is shown in Exhibit A. Cindy
wants to move data in a folder named Research Guidelines from her own
computer to the Lab Experiments folder on the computer named LAB1. She
wants no other user to be able to alter that data once it's placed on
LAB1. The desired folder structure on the computer named LAB1 is show
n in Exhibit B. You want the Users local group to have Read permission
's only for the Research Guidelines folder. How should you set this up
?
#1 Exhibit A #2 - Exhibit B
Lab Experiments Lab Experiments
Results1 Research guidelines
Results2 Results1
Results3 Results2
Results3
ANSWER: Move the Research Guidelines folder from Cindy's computer to t
he Lab Experiments folder on the computer named LAB1. Assign the Users
local group Read permission for the Research Guidelines folder on the
computer named LAB1.
30. Permissions on C:\ACCOUNT are configured as follows:
LOCAL GROUPS SHARE PERMISSIONS
Sales No Access
Secretaries Change
Everyone Read
James is a member of the Sales, Secretaries, and Everyone groups. What
are his effective permission's for the C:\ACCOUNT folder?
- No Access
THINGS TO REMEMBER
1:-A RAS sever on which call back security is enable and u want establ
ish multilink connection with one dial-up ISDN number, will not work,b
ecause callback security doesn't work with single dial-up ISDN number.
2:-which files emergency disk contains
autoexec.nt,config.nt,ntuser.da,sam.,security.,setup.log and system fi
les.
3:-To prevent a faulty 16-bit application run faulty 16-bit applicatio
n in it's own NTVDM,and other applications in Win 16 NTVDM.
4:-The name of the server must precede the name of the organisational
zone,when mapping the network drive to an Internet path.
5:-You can prevent windows NT workstation from over writing existing c
rash dump file by starting DR Watson for windows NT and enabling the A
ppend To Existing Log File Option.
6:-NDS( netware directory services ) replaces the bindery of Netware 2
.x, Netware 3.x. It manages accounts and network resources.
7:-The NET START command starts windows NT Workstation networking reso
urces.
8:-The logon scripts and system policy for the domain must be replicat
ed from PDC to BDC.
9:-To change the password of Netware 4.x that uses NDS from your windo
ws NT workstation ,you must change password option in windows NT secur
ity dialog box and select Netware in the domain field.
10:-"net use LPTx\\server\print_share" command is used to map physical
printer port to remote network printer from the command prompt of Win
dows NT workstation,where the" x " is the number of printer port, "sev
er" is the name of print server and "print_share" is the name of share
d printer.
11:- To capture the packets from Network Card,use Network Monitor Agen
t.
12:- 16- bit applications run by default.? they run as separate thread
s in a single NTVDM with shared address.
13:-Install Network Monitor Agent to monitor %network utilisation in p
erformance monitor.
14:- Smallest unit can be scheduled with the Microkernel is THREAD.
15:-You want to run 16-bit applications as preemptively multi task and
keep them away from other applications the run them in its own NTVDM.
16:-If one 16-bit application crashed and corrupting others in same su
it then Run the application which are in suit as in Default NTVDM and
run crashed application in their Own NTVDM.
17:- Install SNMP to trap messages on TCP/IP network.
Know your rights and effective permissions! Remember: Remote (share) =
most
restrictive. No Access Rules Over All. Local (at workstation) = least
restrictive
If a file is moved within the same partition - what happens to compres
sion attributes?
Same as permission's - move in same partition = retains it's attribute
s, move across partitions = inherits attributes of parent, copy anywhe
re = inherit.
Files needed to make a boot disk - Ntldr, Ntdetect, boot.ini,
Ntbootdd.sys (for SCSI
with bios disabled)
1. For NT Workstation, you can have a maximum of 10 users for a shared
resource (unlimited for NT Server)
2. Remember that System policies, logon scripts and commonly used file
s need to be replicated to ALL Domain Controllers
3. NT WorkStation has Power Users, to create and modify accounts, as w
ell as to share resources.
4. Remember that only an Administrator or a Power user can share resou
rces.
5. An audit policy is set on a computer-by-computer basis, but can be
viewed from remote systems on the network by any user with administrat
ive privileges.
6. To monitor TCP/IP from performance monitor on a remote system or on
the local system, SNMP service needs to be installed on THE MACHINE T
HAT NEEDS TO BE MONITORED.
7. Only if the Server Service is running, other systems can access sha
red resources on your machine.
8. NT Workstation cannot be a DHCP or a WINS server.
9. As far as replication is concerned, NT Workstation cannot be an exp
ort computer. It can only be an import computer.
10. Remember that Intel systems are CISC systems, and that anything th
at is not Intel is RISC ( ie. DEC Alpha, MIPS and PowerPC's)
11. Volume sets can be extended. Stripe sets cannot be extended.
12. Keep chanting to yourself: Volume sets do not improve performance.
Stripe sets improve performance.
13. Volume sets and Stripe Sets can be formatted either on FAT or NTFS
, but cannot be accessed from Windows 95 or MS DOS.
14. Remember this especially for the NT Server Exam:
In Control Panel, Services applet:
Server Services:
Optimisation:
a. Minimise memory used - if there are less than 10 clients for your s
erver
b. Balance - if there are 10 to 64 clients
c. Maximise throughput for file sharing: If there are 65 or more clien
ts and if your server is a file and Print Server
d. Maximise throughput for Network Applications - if your server is an
application server (eg. SQL Server installed) or a Network Server
15. Give a lot of importance to prioritizing applications
16. There is an excellent web site on the Net to explain about unatten
ded installation of Windows NT Workstation, which I have downloaded. T
he web site is :
www.microsoft.com/ntworkstation/
It is a Deployment guide to automating Windows NT Setup
17. Know the use of each Control Panel Applet thoroughly ( especially
troubleshooting of Display type/refresh rate etc which is found in the
Display Applet. - you can get upto 3 questions on this)
18. Know your RAS thoroughly
19. Connectivity to NetWare, when NWlink is the only protocol required
, when CSNW is required, with CSNW installed, what resources can be ac
cessed on NetWare etc.
20. Know all about conversion possibilities from FAT to NTFS, HPFS to
NTFS and when such conversions are needed.
21. Know about Virtual memory.
22. Know that for the most optimal performance of your system, place y
our paging file on all disks other than the one containing the system/
boot partition ( especially as long as it is not on system partition)
23. Know what is required to be configured in TCP/IP for a routed as w
ell as non-routed network
24. The Windows NT Boot Process is another very important topic. Know
files needed for boot sequence (especially on an Intel machine), files
stored on Windows NT Boot disk, that the boot disk must be formatted
from Windows NT(very important), and troubleshooting the boot process.
25. Know under what situations to use ERD, Setup Disks, Boot Disks as
well as Last Known Good Configuration(LKGC).( if the change to a drive
r etc was recent, it is probably wise to use LKGC)
26. Options available in CSNW (like Print Form Feed, print banner page
and notify)
Hope this helps others
Pepe.
--
※ 来源:．月光软件站 http://www.moon-soft.com．[FROM: 202.100.20.133]
|
|