发信人: hikehilter()
整理人: reynolds(2001-08-21 09:01:10), 站内信件
|
29. If you want to use a URL to attach to a printer that is defined on a
Windows 2000 Professional print server, what service must be running?
A. Peer Web Services
B. Print Web Manager
C. Internet Print Manager
D. URL Print Manager
Answer: A
If you want to use Internet printing on a Window 2000
Professional print server, you must have PWS installed.
30. You are the administrator of a Windows 2000 Professional Computer that
has a shared printer. Several departments in your company use the shared
printer.
The sales department frequently prints multiple-page presentation
graphics, which take a long time to print. Users in other departments who
have short messages to print must wait an unnecessarily long time for
theirjobs to print.
You want to improve the efficiency ofprinting for all users who use the
shared printer. You want to accomplish this with the least amount of
administrative effort.
What should you do?
A. Configure the priority of the printer to 50. Add a new printer, and set
the prorty to 1.
For the new printer, deny Print permission for users in the sales
department.
B. Configure the priority of the printer to 50. Add a new printer, and set
the priority to 95.
For the new printer, deny Print permission for users in the sales
department.
C. Monitor the print queue, and raise the priority of all the print jobs that are sent by users who are not members ofthe sales department.
D. Delete the old printer. Add a new printer, and set the priority to a higher value. Pause the print queue only when graphic-intensive print jobs are printing.
ANS:B
31. A user sent a Postscript file to a PCL printer and now reports that each page printed has one character on it and won't stop printing. What is your first line of action to quickly correct the problem?
A. Pause the printer, in the Printers folder, from the context menu
Submit your own braindump through our submission form
ans: a
Have a question about a braindump? Don't understand why the answer is the answer? Think the answer might be wrong? Ask it on the discussion forumIf you see any braindumps with copyrighted information please email the webmaster
1. You install an external SCSI tape drive. The drivers install OK and the system starts up normally. When you reboot the pc later in the afternoon, you get a blue screen. What to do?
a. Go into device manager and remove SCSI device.
b. Select recovery console and disable the driver with DISABLE command
c. Select safe mode and remove the driver
ANS = C
1a.You are attempting to install a computer called WIN2Ksales1 into the
TestCorp.com domain. When you attempt to join the domain, you get an error
that the domani can't be located. Which of the following options must be
configured and running in your domani?
Choose two answers.
A. A PDC
B. A domain controller
C. A DNS server
D. A WINS server
Answer: B, C You must have a domain controller and a DNS server running in your domain in order to add a computer to the domain.
2. The pc picks up the installed screen card as vga 16 colours. You can not change any of the colour or resolution settings and the manufacturer, version, make etc of the card is not shown. What to do?
a. Install a driver for the monitor.
b. Install a WDM compliant driver for the screen card and monitor.
c. Change the screen card.
ANS = B
3. You have a laptop that doesn't shut down at all. It stays on the
shutdown screen and even if you try to switch it off, it won't switch off?
a. Enable APM in control panel, power options.
b. Disable APM in the BIOS
c. Enable hibernate in control panel, power options
ANS = A
4. You create an accessibility option for a user on one pc and save it as a .acw file. You want another user on another pc to use this same file. You save the file to a folder on the first pc and share the folder. When you try to use the file from the 2nd pc you get an error - "cannot read from the .acw file"
a. Give the user on the 2nd pc read access to the shared folder on the 1st pc
b. Copy the .acw file to c:\documents and settings\default user
c. Copy the file to a SDD and then use it on the 2nd pc
ANS = A
5. Some question about a mouse drive not working, then the admin installs a new signed mouse driver and reboots. After rebooting he looks in the device manager and sees that the old driver is still installed. How does he fix this.
a. Use device manager to remove the original driver
6 You install a USB scanner but it doesn't work. The device manager
EXIHIBT shows the USB root hub entry missing. What should you do?
A : enable the USB port in the BIOS
7: You have a 10Mb network card in your computer. You install a 100Mb
network card and restart the computer. The 100mb card in not working due
to a conflict with the 10Mb card. You want only the 100Mb card to be
active. What should you do?
Ans: disable the 10Mb card using disable device
8: You install a USB scanner but it doesn't work. Figure shows exclamation
mark at Infra-red port, but notice that the USB ports are missing!
A: Request a new BIOS from the hardware manufacturer to enable USB.
9: You install a ZIP drive into a Windows 2000 system. You install the
drivers. On reboot the system locks. You can't get in, and even safe mode
doesn't work. How do you unload the driver to get back in to Windows 2000
professional? (Choose three)
A. Go into device manager and remove Zip drive.
B. From a command prompt run LISTSVC to disable the zip driver
C. From a command prompt, run DISABLE to disable the zip driver
D. Select recovery console from the repair
E. Start the PC from CD-ROM
Ans. C, D.E ( in altro dump 蠩ndicato che DISABLE non pu򠧩rare in un
command prompt ma solo in RECOVERY COMMAND PROMPT - fare attenzione )
10. You have a system with two monitors, both set for 16-bit color and
1024 X 768 resolution. You decide to set up a DOS application in a DOS
Virtual Machine Window. Default DOS configuration is in effect (Default
autoexec.nt and config.nt) and the default DOS .PIF file is present. You
place the shortcut on the first monitor screen. When you open it the
screen goes to scrambled. You move the shortcut to monitor #2 and
launching the app locks. What do you need to do?
A. Change both monitors to 256 colors. Configure the application to run
full screen
B. Change both monitors to run and optima settings. Configure the
application to run full screen
C. Update the drivers for Video card #1 Change #2 to 640 X 480
D. Do something else
Answer: A
----
|
|