发信人: hikehilter()
整理人: reynolds(2001-08-27 08:35:36), 站内信件
|
90. You are the administrator of a Windows 2000 network. You are preparing to upgrade a computer running Windows NT Workstation 4.0 to Windows 2000 Professional. What must you do?
a. Run Chkdsk
b. Install Service Pack 5
c. Disable disk compression
d. Remove all antivirus software
91. You are the administrator of a network supporting Windows 2000 Professional computers. You want to configure Tom's computer to run the Magnifier each time he logs on to his computer. Which two interfaces can you use?
a. Utility Manager
b. Accessibility Wizard
c. Accessibility Options icon in Control Panel
d. Users and Passwords icon in Control Panel
A: B
92. You want to connect to an Internet printer named HP_laser. The printer is attached to a print server named Server1 and is shared under the Resource share. Which syntax should you use?
a. http://Server1//.HP_laser/Resource
b. http://Server1//Resource/.HP_laser
c. http://Printers/Server1/Resource/.HP_laser
d. http://Server1/Printers/Resource/.HP_laser
A: D
93. You are the administrator of a Windows 2000 Professional computer with two processors. You want to improve the performance of a process by assigning it to a single processor. What should you do?
a. Use a registry editor
b. Click Set Affinity in Task Manager
c. Click Set Affinity in Device Manager
d. Windows 2000 Professional does not support this configuration
A: B
94. The \Sales folder is a compressed folder on an NTFS partition. You want to move the \Sales folder from your Windows 2000 Professional computer to another NTFS volume that does not have any compressed folders. You want the \Sales folder to remain compressed after it is moved. What should you do?
a. Move the folder
b. Compress the target folder, and move the folder
c. Apply compression to each file in the \Sales folder, and move the folder
d. Uncompress the source folder, compress the target folder, and move the folder
A: B
95. You are the administrator of a Windows 2000 Professional computer. You install a device on the computer, but Windows does not install and configure the device properly. The Device Manager reports "This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12)". Which two methods can you use to resolve this problem? (Choose two.)
a. Restart the computer
b. Update the system BIOS
c. Remove any unneeded ISA devices
d. Manually assign resources to the device
A:
96. You are the administrator of a workgroup supporting Windows 2000 Professional computers.
You configure the Group Policy by setting the Account lockout duration to 0. What effect will this have?
a. Users will never be locked out
b. Users will be locked out for 69 days
c. Users will be locked out after one failed logon attempt
d. Users will be locked out indefinitely until the Administrator unlocks the user account
A: D
97. You are the administrator of a domain supporting Windows 2000 Professional computers. You want to implement a smart card logon process. Which protocol should you use?
a. PAP
b. SPAP
c. CHAP
d. EAP-TLS
e. MS-CHAP
A: D
98. You are the administrator of your company's network. You want to set up a print server to support client computers running these operating systems:
Windows 2000
Macintosh
NetWare
UNIX
Your proposed solution is to configure a computer running Windows 2000 Professional as a print server.
Which clients computers will this configuration support? (Choose all that apply.)
a. UNIX
b. NetWare
c. Macintosh
d. Windows 2000
A: AD
(
*Windows 2000 Server, which can handle a large number of connections and supports Macintosh and UNIX computers and NetWare clients.
*Windows 2000 Professional, which is limited to 10 concurrent connections from other computers for file and print services. It doesn't support Macintosh computers or NetWare clients, but it does support UNIX computers.
)
99. You are the administrator of a network supporting computers running Windows 95, Windows 98, Windows NT 4.0, and Windows 2000 computers. You want to host an Internet printer on your Windows 2000 Professional computer. What should you do? (Choose two.)
a. Install Peer Web Services on your computer
b. Install Internet Information Services on your computer
c. Advise Internet printing clients to use Internet Explorer 4.0 or higher
d. Advice Internet printing clients to use Internet Explorer 5.0 or higher
A: AC
(http://www.microsoft.com/windows2000/en/server/help/sag_printconcepts_internet_printing.htm)
100. Your Windows 2000 Professional computer has no built-in IrDA hardware. You want to use an external wireless adapter with your computer. What should you do? (Choose all that apply.)
a. Reconfigure a serial port as infrared
b. Attach a serial IrDA transceiver to a serial Com port
c. Use the Add/Remove Hardware wizard to install the device
d. Open the Device Manager and choose Scan for hardware changes from the Action menu
A: BC
101. You are the administrator of a Windows 2000 Professional computer with a fax modem. You want to provide different billing codes to support faxes sent by different users. What should you do?
a. Create a different printer for each billing code
b. Purchase a third-party fax management solution
c. Create multiple billing codes for a single fax printer
d. Assign the Print fax permission in the Everyone group
A: A
102. You are the administrator of a network supporting Windows 2000 computers. You want to upgrade a computer running Windows NT Workstation 4.0 to Windows 2000 Professional. Which method can you use to upgrade?
a. Perform a network installation
b. Boot using the four boot floppy disks
c. Boot from the Windows 2000 Professional CD
d. Start Windows NT Workstation 4.0 and run Winnt.exe
e. Start Windows NT Workstation 4.0 and run Winnt32.exe
A: E
103. You are the administrator of a network supporting Windows 2000 Professional computers. A user calls you to report that she has difficulty holding down two or more keys at the same time. Which option should you instruct the user to enable?
a. FilterKeys
b. SerialKeys
c. StickyKeys
d. ToggleKeys
A:
104. You are the administrator of your company's network. You want to use Windows Installer to deploy software applications on computers running Windows 2000 Professional. The software should appear as though it has been installed, but should not actually be installed until users attempt to run the application. You also want to ensure that only authorized users can run the application. How should you configure the package? (Choose two.)
a. Assign the application to the users
b. Publish the application to the users
c. Deny the Assign Group Policy permission for the Authenticated User group
d. Remove the Assign Group Policy permission for the Authenticated User group
A: AD
105. You are the administrator of your company's network. The user of a Windows 2000 Professional computer is unable to connect to a network printer using a Web browser. What should you do to allow the user to connect to the printer?
a. Use the Search function
b. Using the Indexing Service
c. Assign the user the Print permission to the printer
d. Go to the user’s computer and use the Add Printer wizard to connect to the network printer
A: C
106. You are the administrator of a network supporting Windows 2000 Professional computers. A user makes changes to his user profile, and then logs off. The next day the user logs on again and finds that all changes to his user profile have been lost. No error messages are displayed. What should you do to allow the user to save changes to his user profile?
a. Reinstall Windows 2000 Professional
b. Add the user to the local Users group
c. Add the user to the local Administrators group
d. Delete the default user profile, and restart the computer
A: B
107. You are the administrator of a Windows 2000 Professional computer with a built-in 33-Kbps modem. You install a 56-Kbps ISA modem, but the new modem does not function correctly. How can you use the 56-Kbps modem?
a. Install the 56 Kbps modem in a different slot
b. Remove the 56 Kbps modem using the Device Manager
c. Remove the built-in modem using Device Manager
d. Disable the built-in modem using Device Manager
A: D
108. You are the administrator of a domain supporting Windows 2000 Professional computers. You want to use IPSec with a proxy server. How should you configure the Internet interface of your proxy server to ensure that packets secured with IPSec are not rejected? (Choose three.)
a. Define input and output filters using UDP port 161 (0x1F1) for ISAKMP/Oakley negotiation traffic.
b. Define input and output filters using UDP port 500 (0x1F4) for ISAKMP/Oakley negotiation traffic.
c. Define input and output filters using IP Protocol ID 51 (0x33) for IPSec Authentication Header traffic.
d. Define input and output filters using IP Protocol ID 52 (0x34) for IPSec Encapsulating Security Protocol traffic.
e. Define input and output filters using IP Protocol ID 50 (0x32) for IPSec Encapsulating Security Protocol traffic.
A: BCE
(http://www.microsoft.com/windows2000/en/professional/help/sag_ipsecbpspecial.htm)
----
|
|