发信人: mp3man()
整理人: (1999-09-19 20:26:56), 站内信件
|
！！！！！有些考题答案不都正确！！！！！！！
NT Server 4.0
Subject: 70-67 Braindump
1.) You want to increase the perfomance of a Windows NT SERVER
computer; there are usually 10 or fewer simultaneous connection
s.
Which Windows NT Server setting should you configure:
a) Workstation Service
b) Server Service (answer)
c) Virtual Memory
d) Foreground application performance
2.) You notice that the response on one of your Windows NT Serv
ers
is poor it has two 2 GB hard drives with two 1 GB NTFS partitio
ns
on each drive, the paging file is on the first physical disk WH
ICH
also contains the system partition. What should you do
a) Increase the size of the paging file
b) Decrease the size of the paging file
c) Move the paging file to the second physical disk (answer)
d) Move the paging file to a different partition on the first
physical disk
3.) Your network is configured as a single domain and has 5 Win
dows
NT Server computers. You want to use performance monitor to ana
lyze
disk activity for a week to determine overall utilization at pe
ak
periods on each of the servers. Hoe should you collect
a) Create an alert log
b) Use the report view
c) Use the chart view
d) Create a log file (answer)
4.) By using performance monitor you learn that your Windows NT
Server computer is running slowly due to excessive paging. How
should you correct this problem?
a) Increase the size of the paging file
b) Decrease the size of the paging file
c) Add memory to your computer (answer)
d) Add a faster processor
5.) You suspect that excessive paging resulting from the lack o
f
memory is causing slow performance on an NT Server. You want to
use
performance monitor to confirm your suspicions. Which activity
should you monitor?
a) The number of pages per second on a server (answer)
b) The percentage of physical disk activity
c) The percentage of the paging file that is in use
d) Peak percentage of the paging file that is in use
6.) You want to install Windows NT Server by using the NT CD-RO
M.
How can you do this? Choose all that apply.
a) Boot from the CD-ROM and run Setup.exe
b) Boot from MS-DOS and verify that CD drivers are loaded run
setup.exe from CD-ROM
c) Boot from MS-DOS, verify that CD drivers are loaded run
Winnt.exe/b from CD-ROM (answer)
d) Boot from MS-DOS, verify that CD drivers are loaded run
Winnt32.exe/b from CD-ROM
e) Boot from the Setup boot disk (answer)
7.) Your network consists of one NT Server computer and 100 NT
Woskstation computers. The network uses TCP/IP and the server h
as
two network adapters each adapter to a separate LAN segment. Yo
u
want to configure the server to support routing across the two
segments?
a) Manually assing a network IP to each network adapter. (answe
r)
b) Manually assing an identical IP address to both adapters.
c) Use DHCP to assing a unique IP address to each adapter.
d) Use DHCP to assing identical IP addresses to both network
adapters.
8.) Your network has 40 Windows NT Workstation computers, the
computers all belong to a workgroup named support. You want to
install a Windows NT Server Computer that is configured as a PD
C
WITH the domain name SUPPORT. You what all Workstation computer
s
a) A domain administrator must use User Manager for Domains to
create accounts for the Windows NT Workstation computers.
b) A domain administrator must use Server Manager to add the NT
Workstation computers to the domain. (answer)
c) A Window NT Administrator must reinstall each workstation to
add
it to the domain.
d) A Windows NT Administrator must log on to each workstation a
nd
use the Network option in the control Panel to configure
workstation join the domain.
9.) The FISHER Company has one central location and three remot
e
locations. Each location has one NT Server computer and 40
Workstation. The workstation at the remote location use NetBEUI
to
connet to resources on the local network. The use a router and
T
a) At the remote locations servers set up NetBEUI first AND TCP
/IP
for the server Service
b) At the central location servers set up TCP/IP first and Net
BEUI
second for the server service
c) At the remote location workstations set up NetBEUI first and
TCP/IP second for the Workstation Service (answer)
d) At the remote location workstations set up TCP/IP forst and
NetBEUI second for the Workstation Service
e) Binding order will not affect the speed of the network acces
s
10.) You want to install NT Server on an MS-DOS based computer
by
using the network. The server installation files are available
on a
shared directory on an NT Server named CF1. What must you do to
start the installation?
a) Boot the MS-DOS based computer from the NT Server setup disk
b) CF1 use the Client Network administrator to create an NT Ser
ver
startup disk, boot the MS-DOS based computer from MS-DOS, run
winnt.exe from the startupdisks.
c) Boot the MS-DOS based computer from MS-DOS insert the first
NT
Floppy and run Winnt.exe from the disk
d) Boot the MS-DOS based computer from MS-DOS, connet to the sh
ared
directory which contains the NT Server files. Run Winnt32.exe f
orm
that drive.
e) Boot the MS-DOS based computer from MS-DOS, connet to the sh
ared
directory which contains the NT Server files. Winnt.exe form th
at
drive. (answer)
11.) You are installing NT Server on an Intel based computer fr
om a
CD-ROM. The NTinstallation program fails to detect your non-SCS
I
CD-ROM drive. How can you enable the NT setup program to recogn
ize
your non-SCSI CD-ROM drive?
a) Restart the NT installation program, select "specify additio
nal
device" and select the driver for the CD-ROM adapter. (answer)
b) Restart the NT installation program, select "scan system for
mass storage devices"
c) Insert the Windows NT Setup boot disk, from the command prom
pt
type winnt.exe/s
d) Insert the Windows NT Setup boot disk, from the command prom
pt
type NT detect.com
12.) You attach an external tape drive to your NT Server Comput
er;
the tape drive requires a SCSI controller, which you also insta
ll.
What must you do to make the new SCSI controller and tape drive
to
work with the system? Choose all that apply.
a) Install the appropriate driver for the SCSI controller (answ
er)
b) Install the appropriate driver for the Tape device (answer)
c) Install the Windows NT Backup program
d) Restart the Server (answer)
e) Start the SCSI controller by using the "SCSI adapters" optio
n in
Control Panel
13.) Your NT Server computer is configured to use NWLINK IPX/SP
X
compatible protocol. Your clients also use IPX/SPX protocol. Yo
ur
clients are not available to connect to the server. What is the
most likely cause of the problem?
a) The SUBNET Mask was set incorrectly.
b) File permissions were set to no access.
c) An incorrect frame type was selected on the server (answer)
d) The workstation service on the NT Server failed to start.
14.) A NT Server computer on your network is infected with a bo
ot
sector virus. To remove the virus you erase the contents of the
boot sector you restart the server and receive a massage that "
the
operating system can not be found". How should you fix the prob
lem?
a) Format a floppy on a different NT computer, use this disk to
start the failed server and use the SYS command to reconstruct
the
boot sector.
b) Use the NT installation disk to start the failed server and
when
prompted use the emergency repair disk to reconstruct the boot
partition. (answer)
c) Run the RDISK utility on the server to repair the system
partition.
d) Start the server with a diskette, which contains the NT syst
em
files, and run Disk administrator.
15.) A print device attached to an NT Server computer stops
working. Several documents are waiting to print. You want to se
nd
these documents to an identical print device attached to a remo
te
NT Server computer. How can you do this?
a) Use Network Neighborhood to open the printer on the remote
server. Copy and paste the print jobs from the failed print dev
ice
to the new print device.
b) Use Network Neighborhood to open the printer on the remote
server. Drag the print jobs from the failed print device and th
e
new print device.
c) Modify the port properties of the failed printer and specify
a
new port by using the UNC name of the remnote printer.
d) Delete the failed printer, create a new printer on the NT Se
rver
computer as a network printer and specify the unique name of th
e
remote printer, use the same share name that failed printer use
d.
(answer)
16.) You create a stripe set with parity on a Windows NT Server
computer with 3 disk drives connected to a SCSI controller. Aft
er
one of the drives fail, you replace it with a new one. The driv
e
that contains the system and paging files was not affected.
a) Back up the existing data to another disk or tape and recrea
te
the stripe set and restore the data.
b) Use disk administrator to select existing stripe members, on
the
new disk drive select a space that is at least the same size as
the
exiting stripe members and choose regenerate from the fault
tolerance menu. (answer)
c) Use disk administrator to create a partition on the new disk
drive that is the same size as the individual drive members and
choose regenerate form the fault tolerance menu of disk
administrator.
d) Do nothing. NT Server will automatically detect the new disk
and
recover the stripe set with parity.
17.) You want to create a backup copy of the entire registry of
a
Windows NT Server computer you want to include the Secutity
Settings and the User Accounts how can you do this while the
computer is running?
a) Use the Windows NT backup program. (answer)
b) Use Server Manager.
c) Use Windows NT Explorer.
d) Use Disk Administrator.
18.) Remote users dial into a RAS server to access a company
database. The application that is used requires the use of a so
cket
interface. All servers on the network have both NetBEUI and TCP
/IP
installed. The remote users will use NT Workstation with NetBEU
I
a) Install the Windows socket interface from the source media.
b) Select how the IP address will be assigned to the workstatio
n.
c) Configure PPP settings for NetBEUI. (answer)
d) Configure SLIP settings for TCP/IP.
19.) You install client based administration tools on a Windows
95
client computer. You want to use the client to manage file
permissions on your NT Server computer. What should you use fro
m
the client computer?
a) Server Manager
b) User Manager for Domains
c) Windows Explorer (answer)
d) Disk Administrator
20.) You configure your RAS Server to use DHCP to assign TCP/IP
addresses. The Windows NT Workstation Computers are configured
to
recieve IP addresses from the server. Which additional
configuration setting or settings for the workstations can you
manage, choose all that apply.
a) Default gateway addresses. (answer)
b) Default FTP addresses.
c) DNS addresses. (answer)
d) WINS server addresses. (answer)
e) Mail server addresses.
21.) Your network is configured as a single domain and has four
domain controllers. All Window administrators use NT Workstatio
n
computers. You want to provide notification, to users who are
administrators, when a system event occurs on any of the server
s
a) Add the user names of the Administrators to the Server Opera
tors
group, they will receive alerts automatically when the system
events occur.
b) Start the Alerter service on each workstation that is used b
y an
administrator.
c) On the PDC use Server Manager to add the Domain Admins group
to
the list of names that should receive alerts.
d) On each controller use server manager to add the user name o
f
each administrator to the list of names that should receive ale
rts.
(answer)
22.) How are file names and file permissions affected when you
copy
a directory from an NTFS partition to a FAT partition? Choose a
ll
that apply.
a) All long file names are discarded.
b) All long file names are retained. (answer)
c) All file permissions are retained.
d) All file permissions are discarded. (answer)
e) All file permissions are inherited from the destination
directory.
23.) You want to create a home directory for Erick in a shared
directory named Homedirs on a BDC. How should you create and as
sign
the home directory to Erick?
a) In User Manager for domains specify a unique path name to th
e
home directory. (answer)
b) In User Manager for domains specify the domain the server an
d
the directory name for the home directory.
c) In Windows NT Explorer create the home directory on the BDC
and
assign "Take Ownership" permission to Erick.
d) In Windows NT Explorer create the home directory on the BDC
and
assign "Full Control" permission to Erick.
24.) What can you use to create shared directories on remote
Windows NT Server computers?
a) Use User Manager for Domains
b) Disk Administrator
c) Control Panel
d) Server Manger (answer)
25.) You install a RAS Server on your network. Remote users wil
l
use NT Workstation computers for Dialup Networking to access a
database. The database is stored on a different NT Server compu
ter
than the RAS Server. You want to use data encryption to prot
a) Configure RAS Server to require data encryption for only NT
Workstation computers. Configure the Server, which contains the
DB
to require data encryption for remote users.
b) Configure the RAS Server to require data encryption for spec
ific
modem ports. Configure the NT Workstation computers to dial up
to
the modems attached only to these ports.
c) Configure RAS Server to require data encryption for specific
user accounts.
d) Configure the RAS Server to allow for all remote users.
Configure the server that contains the DB to require encryption
for
remote users. (answer)
26.) Your network has five NT Server computers, which are locat
ed
in three different subnets, users of remote Windows NT Workstat
ions
use Dialup Networking to connect to the network. You want to
minimize the time it takes for these workstations to resolve th
e
addresses
a) Use a local LMHosts on each NT Workstation computer.(answer)
???
not sure
b) Disable the NetBios interface on each NT Workstation compute
r.
c) Use a LMHosts file on the RAS Server.
d) Install WINS Service on each Windows NT Workstation computer
27.) You want to prevent all users, except members of the
administrators group, from logging on to the domain from any of
the
controllers. What must you do?
a) Remove all users except members of the administrators group
from
the interactive special group.
b) Place all users except members of the administrators group i
n
the interactive special group.
c) Insure that only members of the administrator group have the
right to log on locally. (answer)
d) Insure that only members of the administrators group have th
e
right to log on to a domain controller.
28.) The VGA adapter on your Windows NT Server fails while you
are
using a high resolution setting. You install a new video adapte
r
that is not identical to the failed adapter. You want the serve
r to
run in high-resolution mode, what must you do (choose all that
apply)
a) Reinstall the Windows NT Server.
b) Select the VGA Mode option from the Windows Startup
screen.(answer)
c) Press space bar during startup to invoke last known good
configuration.
d) Install the new video driver by using the Emergency repair d
isk.
e) Install the video driver by using the display option in cont
rol
panel. (answer)
29.) You wan to identify the OS version & role of each Windows
NT
Server and Windows NT Workstation member of a domain controller
a) Network
b) Server Manager (answer)
c) Performance Monitor
d) NetWare Client Administrator
30.) You want to view counters for TCP/IP activity on three Win
dows
NT server computers. You will run Performance Monitor on Window
s NT
workstation computers to view this information.
a) Install SNMP service on each of the Windows NT server comput
ers
(answer)
b) Install SNMP service on the NT workstation
c) Create a log file on TCP/IP performance counters
d) Create a report on TCP/IP performance counters
31.) Your network has three Windows NT server computers you wan
t to
be able to monitor disk space usage on each sever so that you w
ill
be notified when free space on any partition falls below 25%. H
ow
can you do this?
a) On each Server, use server manager to add your computer name
or
user name to the list of names that alerts should be sent to.
b) On each server, use Server Manager to start the alerter serv
ice,
change the startup parameters so that your account name is
specified as the logon name for the alerter service
c) On your computer use Performance monitor to create an alert
on
the % free space counter for each logical disk on each server.
(answer)
d) One one server start the schedule service use the AT command
to
start the Diskperf utility at desired intervals.
32.) You want to increase the performance of Windows NT Server
computer there are usually 10 or fewer simultaneous connections
.
Which Windows NT Server utility should you configure?
a) workstation service
b) Server Service (answer)
c) Virtual Memory
d) Foreground applications performance
33.) Your RAS server is configured as shown in the exhibit uses
of
Windows NT workstation computers dial in to the RAS server.
a) Run applications that require Windows sockets interface (ans
wer)
??? not sure
b) Run applications that require NetBios interface
c) Use IPX protocols to administer NetWare servers that reside
on
the network
d) Connect shared resources that reside on the RAS server.
Dial Out:
x NetBEUI
x TCP/IP
x IPX
Allow remote:
x NetBEUI
x TCP/IP
IPX
Encryption:
x Allow any authentication including clear text
35.) You are the administrator of three network locations. You
administer these networks remotely by dialing in via dial-up
Networking from your Windows NT workstation computer's feature
to
automatically connect to each RAS server based on the UNC name.
What must you do on your Windows NT workstation computer to use
AutoDial?
a) Install DNS service
b) Install a null modem
c) Configure the workstation with SLIP
d) Create a phone book entry for each RAS server you want to us
e.
(answer)
e) Create an LMhosts file that maps DNS names to IP addresses
36.) You are configuring a Windows NT Server computer that will
store important data. Which fault-tolerance method or methods c
an
you use to allow recovery in the event of a hard disk failure?
(Choose all that apply).
a) Disk mirroring (answer)
b) Stripe set
c) Stripe set with parity (answer)
d) Volume set
37.) You want to implement a stripe set with parity on your new
Windows NT Server compute. What is the minimum number of hard d
isk
controllers and physical disks required to implementa stripe se
t
with parity?
a) one hard disk controller and two physical disks
b) one hard disk controller and three physical disks (answer)
c) two hard disk controllers and two physical disks
d) two hard disk controllers and three physical disks
38.) What is the minimum hardware required for disk duplexing?
a) one hard disk controller and two physical disks
b) one hard disk controller and three physical disks
c) two hard disk controllers and two physical disks (answer)
d) two hard disk controllers and four physical disks
39.) You are the administrator of three networks in separate
locations. You administer these networks remotely by dialing in
via
Dial-Up Networking from your Windows NT Workstation computer. Y
ou
want to be able to use the RAS AutoDial feature to automatic lo
gon.
a) Install the DNS service.
b) Install a null modem adapter.
c) Configure the Workstation with SLIP.
d) Create a phone book entry for each RAS server you want to us
e.
(answer)
e) Create an Lmhosts file that maps DNS names to IP addresses.
40.) Your Microsoft Windows 95 client computers access shared
resources on a Windows NT Server computer. The Windows 95 compu
ters
have client for Microsoft Networks installed. You want to allow
the
Windows 95 client computers to access files on a Netware. What
should you do
a) From Windows NT Explorer, use the Map Network Drive button t
o
connect a drive to the NetWare server. Then share that mapped
drive.
b) From Server Manager, use the Shared Directories option on th
e
Computer menu to share the desired directories on the NetWare
server.
c) From the Gateway Service for NetWare option in Control Panel
,
use the Gateway option to share the desired directories on the
NetWare server(answer)
d) From User Manager for Domains, use the Logon to option in th
e
User Properties dialog box to allow the Windows 95 client compu
ters
to access the NetWare server.
41.) The NetWare 3.x server at your branch office will be moved
to
the network at corporate headquarters. The headquarters network
has
1 Windows NT Server computer and 60 Microsoft Windows 95
workstations. The headquarters workstations use Client for
Microsoft windows, you want all clients to be able to access th
e
NetWare server.
a) Install and configure Gateway Service for NetWare on the Win
dows
NT Server computer. No additional software is required on the
Windows 95 workstations. (answer)
b) Install and configure Gateway Service for NetWare on the Win
dows
NT Server computer. Reconfigure the Windows 95 workstations to
use
Client for NetWare Networks only.
c) Install and configure NWLink IPX/SPX compatible transport on
the
Windows NT Server computer. Reconfigure the Windows 95 workstat
ion
to use Client for NetWare Networks only.
d) Install and configure RIP for NWLink IPX/SPX Compatible
Transport on the Windows NT Server computer. No additional soft
ware
is required on the Windows 95 workstations.
42.) You set up directory auditing as shown in the exhibit. (Cl
ick
the Exhibit button.) How will auditing be performed?
a) Any attempts to make changes to an existing file in a
subdirectory of Corporate Archives will be audited.
b) Any files that are moved from a directory located on the sam
e
partition as the Corporate Archives directory will inherit this
Audit policy.
c) Any unsuccessful attempts to delete a file in the Corporate
Archives directory will be audited.
d) Any unsuccessful attempts to modify a file in the Corporate
Archives directory will be audited.
43.) Your network has three Windows NT Server computers. You wa
nt
to change the role of one BDC so it becomes the PDC. You are
working from a Windows NT Workstation computer that has
Client-based Network Administration Tools installed. How can yo
u
change
a) Shut down the existing PDC. Use Server Manager to promote th
e
desired BDC to a PDC. Restart the old PDC. It will be automatic
ally
demoted to a BDC when the new PDC is detected.
b) Shut down both the existing PDC and the BDC that will be
promoted. Restart the BDC. It will automatically become a PDC w
hen
no other PDC is detected. Restart the old PDC. It will be
automatically demoted when the new PDC is detected.
c) Use server Manager to stop the Net Logon service on both the
PDC
and BDC. Promote the BDC to a PDC. Demote the old PDC to a BDC.
Start the Net Logon service on both computers.
d) Use server manager to promote the BDC to a PDC. The existing
PDC
will be automatically demoted. (answer)
44.) You want to configure your domain so that users can execut
e
their logon scripts regardless of which server validates their
logon. What can you do to ensure that the logon scripts will be
available on all domain controllers?
a) Install SNMP on all domain controllers.
b) Configure all servers with disk mirroring.
c) Use the Directory Replicator service on all servers. (answer
)
d) Synchronize the BDC's with the PDC whenever changes are made
to
the logon scripts.
45.) You are administering a Windows NT Server computer from a
Microsoft Windows 95 client computer. You install Client-based
Network Administration Tools on the Windows 95 client computer.
You
want to share a CD-ROM drive that is attached to the Windows
a) The Net.exe utility
b) Server Manager (answer)
c) Disk Administrator
d) Windows NT Explorer
46.) You want default properties and standart group memberships
to
be automatically assigned to new user accounts as the accounts
are
created. What should you do in User Manager for Domains to
accomplish this?
a) Create a user, account named USER-TEMPLATE. Assign to USER -
TEMPLATE the desired properties and group memberships. When new
user accounts are created, they will automatically be assigned
these properties.
b) Create a global group named USER-TEMPLATE. Assign to USER -
TEMPLATE the desired properties and group memberships. New user
accounts will automatically be assigned these properties when t
hey
are created.
c) Create a user account named USER-TEMPLATE. Assign to USER -
TEMPLATE the desired properties and group memberships. Copy
USER-TEMPLATE to create new user accounts. (answer)
d) Create the new user accounts and highlight them. Copy to the
highlighted user accounts an existing user account that has the
desired properties and group memberships.
47.) You want to prevent all users, except members of the
Administrators group, from loggingon to the domain from any of
the
domain controllers. What must you do?
a) Remove all users except members of the Administrators group
from
the Interactive special group.
b) Place all users except members of the Administrators group i
n
the Interactive special group.
c) Ensure that only members of the administrators group have th
e
right to log o locally. (answer)
d) Ensure that only members of the Administrators group have th
e
right to log on to a domain controller.
48.) You install a second network adapter in a computer that ru
ns
Microsoft Windows NT Server. The computer uses COM1, COM2, LPT1
,
and LPT2. The network adapter is set to use 1/0 port address 30
0
and IRQ3. Which device conflicts with these settings?
a) VGA adapter
b) COM1
c) COM2 (answer)
d) LPT1
49.) Your network is configured as a single domain that has 3
domain controllers and 25 Windows NT Workstation computers. For
security purposes, you assign roaming user profiles to all user
accounts in the domain. The profiles are mandatory. The server
on
which the profile resided is down. what happen when users logon
:
a) Users will log on successfully and will receive the Default
User
profile.
b) Users will log on successfully and will receive their profil
es,
but any changes made to the computer will be lost.
c) Users will not be able to log on to the domain. (answer)
d) User can choose to log on to the domain and select a profile
that is stored on a different server.
50.) You use Disk Administrator to create a stripe set with par
ity.
You have four hard disks. Each hard disk has 250 MB of free spa
ce.
How much total space will be available for data storage?
a) 250 MB
b) 500 MB
c) 750 MB (answer)
d) 1,000 MB
51.) You want to use Network Client Administrator to install
Microsoft Windows 95 on a new computer. What must You do? (Choo
se
three.)
a) Share the Windows 95 installation files. (answer)
b) Create a Windows 95 network installation startup disk
c) Create a Windows 95 network installation disk set. (answer)
d) Boot the new computer from the network installation startup
disk
c) Install Windows 95 from the network installation disk set.
(answer)
52.) You install Windows NT Server on partition C of a new comp
uter
that has three physical disks. How can you provide faul toleran
ce
for your Windows NT system files?
a) Convert partition C to NTFS, and then exted the partition to
the
second physical disk by creating an extended volume set.
b) Mirror partition C to the second physical disk (answer)
c) Create a stripe set by combining partition C and the second
physical disk.
d) Create a stripe set with parity by combinning partition C an
d
the other two physical disks.
53.) Ten Windows NT Workstation computers are being moved from
your
branch office to the company's main office. The main office has
a
network that consists of a single domain named CENTRAL. You wan
t
the branch-office Windows NT workstation computers to be able t
o
logon to the domain.
a) A domain administrator must use Server Manager to add the
workstation to the CENTRAL domain. (answer)
b) A Workstation administrator must log on at each workstation
and
configure the workstation to join the CENTRAL domain.
c) A domain administrator must log on at each workstation and
create a computer account, and must then join the CENTRAL domai
n.
d) A Workstation administrator must log on at each workstation
and
create the computer account, and must then join the CENTRAL dom
ain.
e) A Workstation administration must reinstall the Windows NT
Workstation Software on each workstation and configure the
workstations to join the CENTRAL domain.
54.) You want to repair a Windows NT Server installation on a
computer. You do not have the three installation disks that you
need. How should you create the three installation disks?
a) On a Microsoft MS-DOS-based computer, run winnt.exe/ox from
the
Windows NT Server CD-ROM. (answer)
b) On a Microsoft MS-DOS-based computer, run Setup.exe from the
Windows NT Server CD-ROM.
c) On a Microsoft MS-DOS-based computer, run Winnt32.exe from t
he
Windows NT Server CD-ROM.
d) On a Windows NT computer, run Winnt.exe from the Windows NT
Server CD-ROM.
e) On a Windows NT computer, run Setup.exe from the Windows NT
Server CD-ROM.
55.) You are installing a print device that is connected direct
ly
to a Windows NT Server 4.0 computer. Your network has both Wind
ows
NT Workstation 4.0 and Windows NT Workstation 3.51 computers. H
ow
should you configure the printer to support these workstations
a) During printer installation, install the drivers for all nee
ded
hardware platforms and versions of Windows NT.
b) During printer installation, install only the Windows NT 3.5
1
printer driver. (answer)
c) On each Windows NT 3.51 computer, install the Windows NT 4.0
printer driver from the Windows NT 4.0 source media.
d) Do nothing. The Windows NT 4.0 printer drivers are compatibl
e
with the Windows NT 3.51 computers.
56.) Your network consists of 3 Windows NT Server computers and
1
00 Windows NT Workstation computers. The server are named
Research1, Sales1, and Admin1. The network is configured as one
subnet. and TCP/IP is used by all computers. Users in the Resea
rch
often transfer many large data that slow down the whole network
.
What should you do to improve the network performance?
a) Install NetBEUI on the Research department workstation and
server. Configure the Research department computers to use NetB
EUI.
b) Install a second network adapter in Research1 and connect th
is
adapter to the existing physical subnet. Configure only the
Research department workstations to use the new adapter.
c) Install a second network adapter in Research1 and create a n
ew
physical subnet for the Research department. Enable IP forwardi
ng
between the two subnets. Connect the Research department
workstations to this new subnet. (answer)
d) Add a second IP address on the Research1 network adapter and
create a new logical subnet for the Research department users.
Enable IP forwarding between the two subnets. Configure the
Research department workstations to use this new subnet.
57.) Your network uses NWLink IPX/SPX Compatible Transport. Hal
f of
the client computers use the 802.3 frame type, and the other ha
lf
use the 802.2 frame type. You are adding a Windows NT Server
computer to the network. This server has one network adapter
a) Install and configure RIP for NWLink IPXJSPX Compatible
Transport.
b) Configure NWLink IPX/SPX Compatible Transport to use Auto Fr
ame
Type Detection. (answer)
c) Configure NWLink IPX/SPX Compatible Transport to use Manual
Frame Type Detection. Add the 802.3 and 802.2 frame types.
d) Install the driver for the network adapter twice, once for e
ach
frame type. Configure each instance of the driver to support on
e of
the required frame types.
58.) Your network is configured as a single domain that has one
PDC
and two BDCs. You want to use the current PDC as an application
server. How should you reconfigure the roles of the domain
controllers
a) Promote one of the BDC's to become PDC. Reconfigure the form
er
PDC as a member server.
b) Promote one of the BDC's to become the PDC. Reinstall the fo
rmer
PDC and configure it as a member server. (answer)
c) Demote the PDC to become a member server. Reinstall an exist
ing
BDC and configure it as the PDC.
d) Demote the PDC to become a member server. Promote one of the
BDC's to become the PDC.
59.) Windows NT Server 3.51 is installed on your computer. You
want
to upgrade to Windows NT Server 4.0, and you want to preserve y
ou
existing configuration settings. How can you perform the upgrad
e?
(Choose all that apply).
a) Boot from the Windows NT 4.0 Setup boot disk. Install the
Windows NT 4.0 files in the directory that contains your Window
s NT
3.51 files.
b) Boot from the Windows NT 4.0 Setup boot disk. Install the Wi
ndow
NT 4.0 files in a new Winnt40 directory.
c) Start Windows NT 3.51.Run Winnt32.exe from the Windows NT
command prompt. Install the Windows NT 4.0 files in the directo
ry
that contains your Windows NT 3.51 files.(answer)
d) Start Windows NT 3.51. Run Winnt.exe from the Windows NT com
mand
prompt. Install the Windows NT 4.0 files in the directory that
contains your Windows NT 3.51 files.
60.) A user at a Microsoft Windows 95 client computer connects
to a
shared printer on a Windows NT Server computer that is configur
ed
as a PDC. The user reports that she cannot access files in a sh
ared
directory on that server. You make the user a member of a group
that has full controll to the shared directory but she still ca
nnot
access. What is most likely the problem?
a) The user is using an incorrect password.
b) The change you made to the user's group membership will not
take
effect until the user logs off and logs on again.(answer)
c) The change you made to the user's group membership has not y
et
been replicated to all of the domain controllers.
d) The user does not have an account in the domain.
61.) You create a printer on your Windows NT Server computer fo
r a
network interface HP LaserJet print device. When you use Print
Manager to select a print destination, the Hewlett-Packard Netw
ork
Port option does not appear. Why does this happen?
a) The user is using an incorrect password.
b) DLC is not installed on the server.
c) The print device is not properly configured to use the optio
nal
I/0 port. (answer) ???
d) You did not select an HP LaserJet-compatible printer driver.
62.) Your RAS server has two internal modems. Remote users repo
rt
that when they try to dial in to the RAS server, they are being
disconnected immediately. How should you diagnose this problem?
a) Use the Registry Editor to enable device logging. (answer)
b) Use Performance Monitor to view RAS connection details.
c) use Network Monitor to view RAS connection details.
d) Use the Remote Access Admin utility to view the port status.
63.) You configure an x86-based Windows NT Server computer with
disk mirroring for the boot partition. The primary hard disk on
this server fails. How should you create a fault-tolerance boot
disk mirrored partition?
a) Format a floppy disk by using Microsoft MS-DOS. Copy Ntldr,
Ntdetect, com Ntbootdd.sys and Boot.ini to that disk. On the fl
oppy
disk, make no changes to the files.
b) Format a floppy disk by using Microsoft MS-DOS. Copy Ntldr,
Ntdetect.com, Ntbootdd.sys, and Boot.ini to that disk. On the
floppy disk, make changes to the ARC path name in the Boot.ini
file
to reflect the location of the system files on the mirrored dis
k
c) Format a floppy disk by using Windows NT. Copy Ntldr,
Ntdetect.com, Ntbootdd.sys, and Boot.ini to that disk. On the
floopy disk, make no changes to the files.
d) Format a floppy disk by using Windows NT.Copy Ntldr,
Ntdetect.com, Ntbootdd.sys, and Boot.ini to that disk. On the
floppy disk, make changes to the ARC path name in the Boot.ini
tile
to reflect the location of the system files on the mirrored dis
k.
(answer)
64.) Documents are failing to print because of a lack of disk s
pace
on the -system partition. How should you correct this problem?
a) Use Windows NT Explorer to drag the spool directory to a new
partition.
b) Change the properties on the server to specify a new locatio
n
for the spool directory. Give the spool directory a new locatio
n
that contains more free disk space. (answer) ???
c) Change the printer properties of each of the printers to spe
cify
a new partition that will contain the spool files.
d) Use Disk Administrator to extend the system partition so tha
t it
contains more free space.
65.) Your Windows NT Server computer is configured to use NWLin
k
IPX/SPX compatible Transport. Your client computers also use NW
Link
IPX/SPX Compatible Transport. The client computers are not able
to
connect to the server. What is the most likely cause of the pro
blem
a) The subnet mask was set incorrectly.
b) File permissions were set to No Access.
c) The incorrect frame type was selected on the server. (answer
)
d) The Workstation service on the server failed to start.
66.) You add a new SCSI controller and network adapter to an
existing Windows NT Server computer. After you start the server
,
you receive a massage that says, "The dependency service failed
to
start." Where should you look for additional information about
a) The Bootlog.txt file
b) The Device.log file
c) The Services, option in Control Panel
d) Event viewer (answer)
67.) You want to perform a tape backup of the registry files of
a
Windows NT Server computer. How must you use the Windows NT Bac
kup
program to do this?
a) Select Differential as the backup type.
b) Use the Windows NT Backup program from a remote Windows NT
Server computer only.
c) Specify at least one file on the volume that contains the
registry. (answer)
d) Stop the Server, service.
68.) You configure stripe set without parity on three physical
disk. One of the disks fails. What can you do to recover data t
hat
was stored on the stripe set?
a) Break the stripe set and recover the data from the remaining
physical disks.
b) Install a new hard disk to replace the failed disk and choos
e
Regenerate from the Fault Tolerance menu in Disk Administrator.
c) In the Chock for Error-s dialog box in Disk Administrator,
select Fix file system errors to recover the lost data.
d) Restore the lost data from tape backup. (answer)
69.) A Windows NT Server computer performs a variety of I/0
transactions. The server has five physical disks, each with two
partitions. How should you configure the paging file for optima
l
performance?
a) Place the paging file on the disk that contains the system
files.
b) Place the paging file on any partition other than the boot
partition.
c) Distribute the paging file equally among all the logical
partitions, except on the disk that contains the system files.
d) Distribute the paging file equally among all the physical di
sks,
except the disk that contains the boot and system files.(answer
)
70.) You run Performance Monitor on a Windows NT Workstation
computer to view memory and disk counters on 1 0 Windows NT Ser
ver
computers. You notice that your workstation performs poorly bec
ause
of the demands of tracking many counters. You want to increase
performance of your NT workstation
a) Use the System Properties dialog box to decrease the applica
tion
performance setting for foreground applications.
b) Run Performance Monitor from the command line with the START
command to give Performance Monitor high priority.
d) Start the DISKperf utility to create a larger data-collectio
n
cache.
d) Increase the time interval for data collection. (answer)
71.) The paging activity has increased on your Windows NT Serve
r
computer. As a result, the operating system has expanded the pa
ging
file beyond the specified initial paging size. How can this aff
ect
the operating system? (Choose two)
a) Applications can take longer to start. (answer)
b) Network 1/0 can be increased.
c) The disk containing the paging file can become fragmented.
(answer)
d) The current contents of the paging file can be lost.
72.) You run Performance monitor on a Windows NT workstation
computer to view memory and disk counters on 10 Windows NT serv
er
computers. You notice that your workstation performs poorly bec
ause
of the demand of tracking many counters. You want to increase p
erf
of you NT ws.
a) Use the System Properties dialog box to decrease the applica
tion
performance setting for foreground applications.
b) Run Performance Monitor from the command line with the start
command to give Performance monitor High Priority.
c) Start Diskperf utility to create a larger data-collection ca
che.
d) Increase the time for data collection (answer)
73.) Your network has one PDC and three member servers. You wan
t
users to be able to log on to the domain if the PDC fails.
a) Promote one of the member servers to become a BDC
b) Promote one of the member servers to become a PDC
c) Reinstall Windows NT Server on one of the member servers
Configure that server as a BDC. (answer)
d) Reinstall Windows NT Server on one of the member servers
Configure that server as a PDC.
74.) You want to migrate the files and users accounts from a
Netware server to a Windows NT Server computer. What must you
install on the Windows NT server computer before you can perfor
m
the migration?
a) FTP
b) RIP for NWLink IPX/SPX Compatible Transport
c) Gateway Service for Netware (answer)
d) SAP Agent.
75.) You install Gateway Service for Netware on a Windows NT Se
rver
computer, you want to enable the gateway. What must you create?
a) You must create a user account named Ntgateway on the Netwar
e
server. The user account must have rights for the resources you
want to access.
b) You must creaate a user account named Ntgateway on the Windo
ws
NT server computer. The user account must have rights to the
gateway share names.
c) You must create a group named Ntgateway on the NetWare serve
r.
The group must have rights for the resources you want to
access.(answer)
d) You must create a group named Ntgateway on the Windows NT se
rver
computer. The group must have rights to the gateway share names
.
76.) Client computers on your network are Microsoft Windows 95
and
Microsoft MS-DOS based computers. All of the client computers u
se
Client for Microsoft Network and NWLink IPX/SPX Compatible
Transport. Users at all client computers must have access to da
ta
on the NetWare server.
a) Migration Tool for NetWare
b) NWLink IPX/SPX Compatible transport
c) Gateway Service for NetWare (answer)
d) RIP for NWLink IPX/SPX Compatible Transport
77.) Your existing network consists of 2 NetWare servers and 10
0
NetWare client computers. You add a Windows NT Server computer
to
the network. It has a Microsoft SQL Server database installed o
n
it. You want the NetWare client computers to be able to access
the
data on the NT server. What must you install on the NT server?
a) NWLink IPX/SPX Compatible Transport (answer)
b) Gateway Service for Netware
c) Migration Tool for Netware
d) RIP for NWLink IPX/SPX Compatible Transport
78.) Your network is configured as a single domain named HQ. Yo
u
install a Windows NT Server computer. For additional security y
ou
make this server a member server in the HQ domain so that you c
an
specify administrators from the domain to access the Payroll
directory with the change permission in your member server.
a) Create a local group named Finance on the new member sever.
Add
the AcctMgrs global group to the Finance local group. Assign th
e
Finance local group Change permission for the Payroll directory
.
(answer)
b) Create a global group named Finance on the new member sever.
Add
the AcctMgrs globalgroup to the Finance global group. Assign th
e
Finance global group Change permission for the Payroll director
y.
c) Create a globalgroup named Finance on the new member sever.
Add
members of the AcctMgrs global group to the Finance global grou
p.
Assign the Finance global group Change permissions for the Payr
oll
directory.
d) Create a local group named Finance in the HQ domain. Add the
AcctMgrs group to the Finance local group.
79.) You want to create a home directory for Eric in a shared
directory named Homedirs on a BDC. How should you create and as
sign
the home directory to Eric?
a) In User Manager for Domains, specify a UNC path name to the
home
directory. (answer)
b) In User Manager for Domains, specify the domain, server, and
directory name for the home directory
c) In Windows NT Explorer, create the home directory on the BDC
and
assign Take Ownership permissions to Eric.
d) In Windows NT Explorer, create the home directory on the BDC
and
assign Full Control permissions to Eric.
80.) What happens to file permissions when you move files from
one
subdirectory to another on the same NTFS partition?
a) All file permissions are inherited from the destination
subdirectory
b) All file permissions are discarded
c) All file permissions are retained (answer)
d) All file permissions are set to Full Control for the Everyon
e
special group.
转载至：CHECK POINT MCSE
--
※ 来源:．月光软件站 http://www.moon-soft.com．[FROM: 202.101.0.5]
|
|