精华区 [关闭][返回]

当前位置:网易精华区>>讨论区精华>>网络专区>>● CISCO>>其他厂商>>SAMSUNG SR4901 ISDNROUTER 配置方法

主题:SAMSUNG SR4901 ISDNROUTER 配置方法
发信人: adinos()
整理人: sglzx(2001-08-20 22:13:48), 站内信件

<Router - ISP Connection>

IP(static)/PPP/Security(Out)/Unnumbered/NAT(PAT)


 PC1 ----> SR -------------> ISDN --------------> ISP
           |
 PC2 ------+


PC1 : 
        Ethernet : 214.100.10.2                255.255.255.0  
        Gateway  : 214.100.10.1

PC2 : 
        Ethernet : 214.100.10.3                255.255.255.0  
        Gateway  : 214.100.10.1

SR  : 
         Ethernet : 214.100.10.1                255.255.255.0
        Serial   : 0.0.0.0                0.0.0.0
        Outgoing ID          : son
        Outgoing Password : son-out

NAT Global IP : 123.12.12.1        255.255.255.0
        First, We are set the NAT Global IP with temporary IP (123.12.
12.1).
        When we are connect to ISP, ISP send to me a ONE IP Address dy
namically.
        That IP Address will be copy in NAT Global IP automatically.
          (123.12.12.1 -> Delete)

ISP Tel No   : 3448-8897

====================================================================

SR's configuration


1. Special Link/WAN/PPP over ISDN (for Serial IP)

 Channel                Channel-1
 Channel Status                Up
 ISDN Dest Addr         34488897
 ISDN Dest Sub Addr         (blank)

IP Configuration
 Admin Status                Up
 IP Address                0.0.0.0
 Network Mask                 0.0.0.0
 Routing Protocol        None

IPX Configuration        
 IPX Network Number        (blank)
 Admin Status                Down
 Oper Status                (blank)

Bridge Configuration
 Base Bridge Status        Down
 STP Status                Down


2. Special Link/IP Routing/Static Route (for static table)

 Destination Address                        0.0.0.0                214
.100.10.1
 Subnet Mask                                0.0.0.0                255
.255.255.0
 Channel                                Channel-1        Ethernet
 X.25 Virtual Circuit number                0                0        

 Address of the next hop(Gateway)        0.0.0.0                0.0.0.
0        
 Metric associated with the route        1                1        
 Static Route status                         Enable                Ena
ble


3. Special Link/PPP/Router Security (for Outgoing)

 Router Name                : son
 Outgoing Password        : son-out


4. Features/NAT (for NAT)

NAT Table
 Global IP address                : 123.12.12.1
 Subnet Mask                        : 255.255.255.0
 NAT entry status                : Create
 Net Map list.                         : 214.100.10.0,255.255.255.0;
 Enable NAT in the router        : Yes

NAT Global
 NAT port translation required        : Yes


--Be careful--
  Until Version 1.4 -->
        Net Map list : 214.100.10.2,255.255.255.0,*-1300;214.100.10.3,
255.255.255.0,*-1310;
  From Version 1.4.1 -->
        Net Map list : 214.100.10.0,255.255.255.0;

--
※ 来源:.月光软件站 http://www.moon-soft.com.[FROM: 202.103.136.49]

[关闭][返回]