精华区 [关闭][返回]

当前位置:网易精华区>>讨论区精华>>网络专区>>● CISCO>>配置样例>>Cisco HSRP的配置

主题:Cisco HSRP的配置
发信人: ymllb()
整理人: sglzx(2001-08-20 22:12:33), 站内信件

version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname r1
!
enable password cisco
!
ip subnet-zero
!
 !
 !
 !
 interface Ethernet0
 ip address 136.147.107.101 255.255.0.0
 no ip redirects
 no ip directed-broadcast
 standby 150 timers 5 15   /* 定义150组5秒交换一次hello信息,15秒没收到
hello信息就开始切换 */
 standby 150 priority 110 /* 定义150组的主路由器权值,值越大,为主路由
器希望越大 */
 standby 150 preempt /* enable 150组的hsrp抢占功能 */
 standby 150 authentication cisco  /* 设置150组的router身份验证串 */
 standby 150 ip 136.147.107.100 /* 定义150组的浮动地址,也是这台router
连接的网络的网关 */
 standby 150 track Ethernet0 /* 定义监控的端口 */
!
interface Serial0
 no ip address
 no ip directed-broadcast
 no ip mroute-cache
 shutdown
 no fair-queue
!
ip classless
!
!
line con 0
 transport input none
line 1 16
line aux 0
line vty 0 4
 password cisco
 login
!
end

--
※ 来源:.月光软件站 http://www.moon-soft.com.[FROM: ]

[关闭][返回]