/*
串口基础类库（WIN32） ver 0.2
编译器 ： BC++ 5; C++ BUILDER 4, 5, 6, X; VC++ 5, 6; VC.NET; GCC;
copyright(c) 2004.8 llbird [email protected]
*/
#ifndef _CN_COMM_H_
#define _CN_COMM_H_
#pragma warning(disable: 4530)
#pragma warning(disable: 4786)
#pragma warning(disable: 4800)
#include <assert.h>
#include <stdio.h>
#include <windows.h>
//当接受到数据送到窗口的消息
#define ON_COM_RECEIVE WM_USER + 618 // WPARAM 端口号
class cnComm
{
public:
cnComm(bool fAutoBeginThread = true, DWORD dwIOMode = FILE_FLAG_OVERLAPPED)
: _dwIOMode(dwIOMode), _fAutoBeginThread(fAutoBeginThread)
{
Init();
}
virtual ~cnComm()
{
Close();
UnInit();
}
//打开串口 缺省 9600, 8, n, 1
inline bool Open(int iPort)
{
return Open(iPort, 9600);
}
//打开串口 缺省 baud_rate, 8, n, 1
inline bool Open(int iPort, int iBaudRate)
{
if(iPort < 1 || iPort > 1024)
return false;
SetCommPort(iPort);
if(!OpenPort())
return false;
if(!SetupPort())
return false;
return SetState(iBaudRate);
}
//打开串口, 使用类似"9600, 8, n, 1"的设置字符串设置串口
inline bool Open(int iPort, char *szSetStr)
{
if(iPort < 1 || iPort > 1024)
return false;
SetCommPort(iPort);
if(!OpenPort())
return false;
if(!SetupPort())
return false;
return SetState(szSetStr);
}
//判断串口是或打开
inline bool IsOpen()
{
return _hCommHandle != INVALID_HANDLE_VALUE;
}
//获得串口句炳
inline HANDLE GetHandle()
{
return _hCommHandle;
}
//设置串口参数：波特率，停止位，等 支持设置字符串 "9600, 8, n, 1"
bool SetState(char *szSetStr)
{
if(IsOpen())
{
if(!::GetCommState(_hCommHandle, &_DCB))
return false;
if(!::BuildCommDCB(szSetStr, &_DCB))
return false;
return ::SetCommState(_hCommHandle, &_DCB) == TRUE;
}
return false;
}
//设置串口参数：波特率，停止位
bool SetState(int iBaudRate, int iByteSize = 8, int iParity = NOPARITY, int iStopBits = ONESTOPBIT)
{
if(IsOpen())
{
if(!::GetCommState(_hCommHandle, &_DCB))
return false;
_DCB.BaudRate = iBaudRate;
_DCB.ByteSize = iByteSize;
_DCB.Parity = iParity;
_DCB.StopBits = iStopBits;
return ::SetCommState(_hCommHandle, &_DCB) == TRUE;
}
return false;
}
//设置串口的I/O缓冲区大小
bool SetBufferSize(int iInputSize, int iOutputSize)
{
if(IsOpen())
return ::SetupComm(_hCommHandle, iInputSize, iOutputSize);
return false;
}
//读取串口 dwBufferLength - 1 个字符到 szBuffer 返回实际读到的字符数
int Read(char *szBuffer, DWORD dwBufferLength, int iWaitTime = 20)
{
if(!IsOpen())
return 0;
szBuffer[0] = '\0';
COMSTAT Stat;
DWORD dwError;
if(::ClearCommError(_hCommHandle, &dwError, &Stat) && dwError > 0) //清除错误
{
::PurgeComm(_hCommHandle, PURGE_RXABORT | PURGE_RXCLEAR); /*清除输入缓冲区*/
return 0;
}
if(!Stat.cbInQue)// 缓冲区无数据
return 0;
unsigned long iReadLength = 0;
dwBufferLength = dwBufferLength - 1 > Stat.cbInQue ? Stat.cbInQue : dwBufferLength - 1;
if(!::ReadFile(_hCommHandle, szBuffer, dwBufferLength, &iReadLength, &_ReadOverlapped)) //2000 下 ReadFile 始终返回 True
{
if(::GetLastError() == ERROR_IO_PENDING) // 结束异步I/O
{
WaitForSingleObject(_ReadOverlapped.hEvent, iWaitTime); //等待20ms
if(!::GetOverlappedResult(_hCommHandle, &_ReadOverlapped, &iReadLength, false))
{
if(::GetLastError() != ERROR_IO_INCOMPLETE)//其他错误
iReadLength = 0;
}
}
else
iReadLength = 0;
}
szBuffer[iReadLength] = '\0';
return iReadLength;
}
//写串口 szBuffer
int Write(char *szBuffer, int dwBufferLength)
{
if(!IsOpen())
return 0;
DWORD dwError;
if(::ClearCommError(_hCommHandle, &dwError, NULL) && dwError > 0) //清除错误
::PurgeComm(_hCommHandle, PURGE_TXABORT | PURGE_TXCLEAR);
unsigned long uWriteLength = 0;
if(!::WriteFile(_hCommHandle, szBuffer, dwBufferLength, &uWriteLength, &_WriteOverlapped))
if(::GetLastError() != ERROR_IO_PENDING)
uWriteLength = 0;
return uWriteLength;
}
//写串口 szBuffer
inline int Write(char *szBuffer)
{
assert(szBuffer);
return Write(szBuffer, strlen(szBuffer));
}
//写串口 szBuffer 可以输出格式字符串
int Write(char *szBuffer, int dwBufferLength, char * szFormat, ...)
{
if(!IsOpen())
return 0;
DWORD dwError;
if(::ClearCommError(_hCommHandle, &dwError, NULL) && dwError > 0) //清除错误
::PurgeComm(_hCommHandle, PURGE_TXABORT | PURGE_TXCLEAR);
va_list va;
va_start(va, szFormat);
_vsnprintf(szBuffer, dwBufferLength, szFormat, va);
va_end(va);
unsigned long uWriteLength = 0;
if(!::WriteFile(_hCommHandle, szBuffer, dwBufferLength, &uWriteLength, &_WriteOverlapped))
if(::GetLastError() != ERROR_IO_PENDING)
uWriteLength = 0;
return uWriteLength;
}
//关闭串口
inline virtual void Close()
{
if(IsOpen())
{
EndThread();
::CloseHandle(_hCommHandle);
_hCommHandle = INVALID_HANDLE_VALUE;
}
}
//设定发送通知, 接受字符最小值
inline void SetNotifyNum(int iNum)
{
_dwNotifyNum = iNum;
}
//送消息的窗口句柄
inline void SetWnd(HWND hWnd)
{
_hNotifyWnd = hWnd;
}
//辅助线程控制 建监视线程
bool BeginThread()
{
if(!IsThreadRunning())
{
_fRunFlag = true;
_hThreadHandle = NULL;
DWORD id;
_hThreadHandle = ::CreateThread(NULL, 0, CommThreadProc, this, 0, &id);
return (_hThreadHandle != NULL); //辅助线程
}
return false;
}
//线程是否运行
inline bool IsThreadRunning()
{
return _hThreadHandle != NULL;
}
//获得线程句柄
inline HANDLE GetThread()
{
return _hThreadHandle;
}
//暂停监视线程
inline bool SuspendThread()
{
return IsThreadRunning() ? ::SuspendThread(_hThreadHandle) != 0xFFFFFFFF : false;
}
//恢复监视线程
inline bool ResumeThread()
{
return IsThreadRunning() ? ::ResumeThread(_hThreadHandle) != 0xFFFFFFFF : false;
}
//终止线程
bool EndThread(DWORD dwWaitTime = 100)
{
if(IsThreadRunning())
{
_fRunFlag = false;
::SetCommMask(_hCommHandle, 0);
::SetEvent(_WaitOverlapped.hEvent);
if(::WaitForSingleObject(_hThreadHandle, dwWaitTime) != WAIT_OBJECT_0)
if(!::TerminateThread(_hThreadHandle, 0))
return false;
::CloseHandle(_hThreadHandle);
::ResetEvent(_WaitOverlapped.hEvent);
_hThreadHandle = NULL;
return true;
}
return false;
}
protected:
volatile int _iPort; //串口号
volatile HANDLE _hCommHandle;//串口句柄
char _szCommStr[20];
DCB _DCB; //波特率，停止位，等
COMMTIMEOUTS _CO; //超时结构
DWORD _dwIOMode; // 0 同步 默认 FILE_FLAG_OVERLAPPED 重叠I/O 异步
OVERLAPPED _ReadOverlapped, _WriteOverlapped; // 重叠I/O
//线程用
volatile HANDLE _hThreadHandle; //辅助线程
volatile HWND _hNotifyWnd; // 通知窗口
volatile DWORD _dwNotifyNum;//接受多少字节(>_dwNotifyNum)发送通知消息
volatile bool _fRunFlag; //线程运行循环标志
bool _fAutoBeginThread;//Open() 自动 BeginThread();
OVERLAPPED _WaitOverlapped; //WaitCommEvent use
//线程收到消息自动调用, 如窗口句柄有效, 送出消息, 包含窗口编号
virtual void OnReceive()
{
if(_hNotifyWnd)
::PostMessage(_hNotifyWnd, ON_COM_RECEIVE, WPARAM(_iPort), LPARAM(0));
}
void Init() //初始化
{
memset(_szCommStr, 0, 20);
memset(&_DCB, 0, sizeof(_DCB));
_DCB.DCBlength = sizeof(_DCB);
_hCommHandle = INVALID_HANDLE_VALUE;
memset(&_ReadOverlapped, 0, sizeof(_ReadOverlapped));
memset(&_WriteOverlapped, 0, sizeof(_WriteOverlapped));
_ReadOverlapped.hEvent = ::CreateEvent(NULL, true, false, NULL);
assert(_ReadOverlapped.hEvent != INVALID_HANDLE_VALUE);
_WriteOverlapped.hEvent = ::CreateEvent(NULL, true, false, NULL);
assert(_WriteOverlapped.hEvent != INVALID_HANDLE_VALUE);
_dwNotifyNum = 0;
_hNotifyWnd = NULL;
_hThreadHandle = NULL;
memset(&_WaitOverlapped, 0, sizeof(_WaitOverlapped));
_WaitOverlapped.hEvent = ::CreateEvent(NULL, true, false, NULL);
assert(_WaitOverlapped.hEvent != INVALID_HANDLE_VALUE);
}
void UnInit()
{
if(_ReadOverlapped.hEvent != INVALID_HANDLE_VALUE)
CloseHandle(_ReadOverlapped.hEvent);
if(_WriteOverlapped.hEvent != INVALID_HANDLE_VALUE)
CloseHandle(_WriteOverlapped.hEvent);
if(_WaitOverlapped.hEvent != INVALID_HANDLE_VALUE)
CloseHandle(_WaitOverlapped.hEvent);
}
inline void SetCommPort(int iPort)
{
assert(iPort >= 1 || iPort <= 1024);
char p[5];
_iPort = iPort;
strcpy(_szCommStr, "\\\\.\\COM");
ltoa(_iPort, p, 10);
strcat(_szCommStr, p);
}
virtual bool OpenPort()
{
if(IsOpen())
Close();
_hCommHandle = ::CreateFile(
_szCommStr,
GENERIC_READ | GENERIC_WRITE,
0,
NULL,
OPEN_EXISTING,
FILE_ATTRIBUTE_NORMAL | _dwIOMode,
NULL
);
if(_fAutoBeginThread)
{
if(IsOpen() && BeginThread())
return true;
else
{
Close();
return false;
}
}
return IsOpen();//检测串口是否成功打开
}
virtual bool SetupPort()
{
if(!IsOpen())
return false;
//设置推荐缓冲区
if(!::SetupComm(_hCommHandle, 4096, 4096))
return false;
//设置超时时间
if(!::GetCommTimeouts(_hCommHandle, &_CO))
return false;
_CO.ReadIntervalTimeout = 0xFFFFFFFF;
_CO.ReadTotalTimeoutMultiplier = 0;
_CO.ReadTotalTimeoutConstant = 0;
_CO.WriteTotalTimeoutMultiplier = 0;
_CO.WriteTotalTimeoutConstant = 2000;
if(!::SetCommTimeouts(_hCommHandle, &_CO))
return false;
//清空串口缓冲区
if(!::PurgeComm(_hCommHandle, PURGE_TXABORT | PURGE_RXABORT | PURGE_TXCLEAR | PURGE_RXCLEAR ))
return false;
return true;
}
private:
//监视线程
static DWORD WINAPI CommThreadProc(LPVOID lpPara)
{
cnComm *pComm = (cnComm *)lpPara;
if(!::SetCommMask(pComm->_hCommHandle, EV_RXCHAR | EV_ERR))
return 0;
COMSTAT Stat;
DWORD dwError;
for(DWORD dwLength, dwMask = 0; pComm->_fRunFlag && pComm->IsOpen(); dwMask = 0)
{
if(!::WaitCommEvent(pComm->_hCommHandle, &dwMask, &pComm->_WaitOverlapped))
{
if(::GetLastError() == ERROR_IO_PENDING)
{
::GetOverlappedResult(pComm->_hCommHandle, &pComm->_WaitOverlapped, &dwLength, TRUE);
}
}
if(dwMask & EV_ERR) // == EV_ERR
::ClearCommError(pComm->_hCommHandle, &dwError, &Stat);
if(dwMask & EV_RXCHAR) // == EV_RXCHAR
{
::ClearCommError(pComm->_hCommHandle, &dwError, &Stat);
if(Stat.cbInQue > pComm->_dwNotifyNum)
pComm->OnReceive();
}
}
return 0;
}
};
#endif //_CN_COMM_H_
|
本类阅读TOP10