发信人: oicqdelonglong(泷泷)
整理人: winsy(2003-11-18 08:53:14), 站内信件
|
串口编程调试代码（自编） 之一
main.bas模块如下：
'**********************************
' 基本设置
'**********************************
Public intPort As Integer '串行口号
Public strSet As String '协议设置
Public intTime As Integer '发送时间间隔
'**********************************
'**********************************
'发送与接收标志
'**********************************
Public blnAutoSendFlag As Boolean '发送标志
Public blnReceiveFlag As Boolean '接收标志
'**********************************
'**********************************
'发送模块
'**********************************
Public intOutMode As Integer '发送模式
Public strSendText As String '发送文本数据
Public bytSendByte() As Byte '发送二进制数据
'*********************************
'显示标志
'*********************************
Public intHexChk As Integer '十六进制编码标志
Public intAsciiChk As Integer 'ASCII码标志
Public intAddressChk As Integer '地址标志
Public intAdd48Chk As Integer '4/8位地址标志
'**********************************
Hexedit.bas模块如下：
'**********************************
'接收模块
'**********************************
Public bytReceiveByte() As Byte '接收到的字节
Public intReceiveLen As Integer '接收到的字节数
'**********************************
'**********************************
'显示模块
'**********************************
Public strAddress As String '地址信息
Public strHex As String '十六进制编码
Public strAscii As String 'ASCII码
'**********************************
Public intHexWidth As Integer '显示列数
'**********************************
Public intOriginX As Long '横向原点(像素)
Public intOriginY As Integer '纵向原点(行)
Public intLine As Integer '总行数
'**********************************
'**********************************
'显示常量
'**********************************
Public Const ChrWidth = 105 '单位宽度
Public Const ChrHeight = 2 * ChrWidth '单位高度
Public Const BorderWidth = 210 '预留边界
Public Const LineMax = 16 '最大显示行数
'**********************************
'输入处理
'处理接收到的字节流,并保存在全局变量
'bytReceiveRyte()
'**********************************
Public Sub InputManage(bytInput() As Byte, intInputLenth As Integer)
Dim n As Integer '定义变量及初始化
ReDim Preserve bytReceiveByte(intReceiveLen + intInputLenth)
For n = 1 To intInputLenth Step 1
bytReceiveByte(intReceiveLen + n - 1) = bytInput(n - 1)
Next n
intReceiveLen = intReceiveLen + intInputLenth
End Sub
'***********************************
'为输出准备文本
'保存在全局变量
'strText
'strHex
'strAddress
'总行数保存在
'intLine
'***********************************
Public Sub GetDisplayText()
Dim n As Integer
Dim intValue As Integer
Dim intHighHex As Integer
Dim intLowHex As Integer
Dim strSingleChr As String * 1
Dim intAddress As Integer
Dim intAddressArray(8) As Integer
Dim intHighAddress As Integer
strAscii = "" '设置初值
strHex = ""
strAddress = ""
'*****************************************
'获得16进制码和ASCII码的字符串
'*****************************************
For n = 1 To intReceiveLen
intValue = bytReceiveByte(n - 1)
If intValue < 32 Or intValue > 128 Then '处理非法字符
strSingleChr = Chr(46) '对于不能显示的ASCII码,
Else '用"."表示
strSingleChr = Chr(intValue)
End If
strAscii = strAscii + strSingleChr
intHighHex = intValue \ 16
intLowHex = intValue - intHighHex * 16
If intHighHex < 10 Then
intHighHex = intHighHex + 48
Else
intHighHex = intHighHex + 55
End If
If intLowHex < 10 Then
intLowHex = intLowHex + 48
Else
intLowHex = intLowHex + 55
End If
strHex = strHex + " " + Chr$(intHighHex) + Chr$(intLowHex) + " "
If (n Mod intHexWidth) = 0 Then '设置换行
strAscii = strAscii + Chr$(13) + Chr$(10)
strHex = strHex + Chr$(13) + Chr$(10)
Else
End If
Next n
'******************************************
'***************************************
'获得地址字符串
'***************************************
intLine = intReceiveLen \ intHexWidth
If (intReceiveLen - intHexWidth * intLine) > 0 Then
intLine = intLine + 1
End If
For n = 1 To intLine
intAddress = (n - 1) * intHexWidth
If intAdd48Chk = 1 Then
intHighAddress = 8
Else
intHighAddress = 4
End If
intAddressArray(0) = intAddress
For m = 1 To intHighAddress
intAddressArray(m) = intAddressArray(m - 1) \ 16
Next m
For m = 1 To intHighAddress
intAddressArray(m - 1) = intAddressArray(m - 1) - intAddressArray(m) * 16
Next m
For m = 1 To intHighAddress
If intAddressArray(intHighAddress - m) < 10 Then
intAddressArray(intHighAddress - m) = intAddressArray(intHighAddress - m) + Asc("0")
Else
intAddressArray(intHighAddress - m) = intAddressArray(intHighAddress - m) + Asc("A") - 10
End If
strAddress = strAddress + Chr$(intAddressArray(intHighAddress - m))
Next m
strAddress = strAddress + Chr$(13) + Chr$(10) '设置换行
Next n
'***************************************
End Sub
'*************************************
'显示输出
'*************************************
Public Sub display()
Dim intViewWidth As Long '横向宽度(像素)
Dim intViewLine As Integer '纵向宽度(行)
Dim strDisplayAddress As String
Dim strDisplayHex As String
Dim strDisplayAscii As String
strDisplayAddress = ""
strDisplayHex = ""
strDisplayAscii = ""
Dim intStart As Integer
Dim intLenth As Integer
'***************************************
'调整显示页面大小,设置滚动位置宽度
'***************************************
If intAdd48Chk = 1 Then
frmMain.txtHexEditAddress.Width = 8 * ChrWidth + BorderWidth
Else
frmMain.txtHexEditAddress.Width = 4 * ChrWidth + BorderWidth
End If
frmMain.txtHexEditHex.Width = intHexWidth * 4 * ChrWidth + BorderWidth
frmMain.txtHexEditText.Width = intHexWidth * ChrWidth + BorderWidth
frmMain.txtBlank.Width = BorderWidth
intViewWidth = frmMain.txtHexEditAddress.Width * intAddressChk + frmMain.txtHexEditHex.Width * intHexChk + frmMain.txtHexEditText.Width * intAsciiChk
If intViewWidth <= frmMain.fraHexEditBackground.Width And intLine < LineMax Then
frmMain.txtBlank.Width = frmMain.fraHexEditBackground.Width - intViewWidth
frmMain.hsclHexEdit.Visible = False
frmMain.vsclHexEdit.Visible = False
intViewWidth = frmMain.fraHexEditBackground.Width
intViewLine = intLine
intOriginX = 0
intOriginY = 0
ElseIf intViewWidth > frmMain.fraHexEditBackground.Width And intLine < LineMax - 1 Then
frmMain.hsclHexEdit.Visible = True
frmMain.vsclHexEdit.Visible = False
frmMain.hsclHexEdit.Width = frmMain.fraHexEditBackground.Width
intViewLine = intLine
intOriginY = 0
If intOriginX > intViewWidth - frmMain.fraHexEditBackground.Width Then
intOriginX = intViewWidth - frmMain.fraHexEditBackground.Width
End If
ElseIf intViewWidth < (frmMain.fraHexEditBackground.Width - frmMain.vsclHexEdit.Width) And intLine >= LineMax Then
frmMain.vsclHexEdit.Visible = True
frmMain.hsclHexEdit.Visible = False
frmMain.txtBlank.Width = frmMain.fraHexEditBackground.Width - intViewWidth
intViewWidth = frmMain.fraHexEditBackground.Width
intViewLine = LineMax
intOriginX = 0
If intOriginY > intLine - LineMax Then
intOriginY = intLine - LineMax
End If
Else
frmMain.hsclHexEdit.Visible = True
frmMain.vsclHexEdit.Visible = True
frmMain.hsclHexEdit.Width = frmMain.fraHexEditBackground.Width - frmMain.vsclHexEdit.Width
intViewLine = LineMax - 1
If intOriginX > intViewWidth - frmMain.fraHexEditBackground.Width Then
intOriginX = intViewWidth - frmMain.fraHexEditBackground.Width
End If
If intOriginY > intLine - LineMax + 1 Then
intOriginY = intLine - LineMax + 1
End If
End If
frmMain.txtHexEditAddress.Left = intOriginX
frmMain.txtHexEditHex.Left = intOriginX + frmMain.txtHexEditAddress.Width * intAddressChk
frmMain.txtHexEditText.Left = intOriginX + frmMain.txtHexEditAddress.Width * intAddressChk + frmMain.txtHexEditHex.Width * intHexChk
frmMain.txtBlank.Left = intOriginX + frmMain.txtHexEditAddress.Width * intAddressChk + frmMain.txtHexEditHex.Width * intHexChk + frmMain.txtHexEditText.Width * intAsciiChk
intStart = intOriginY * (6 + 4 * intAdd48Chk) + 1
intLenth = intViewLine * (6 + 4 * intAdd48Chk)
strDisplayAddress = Mid(strAddress, intStart, intLenth)
intStart = intOriginY * (intHexWidth * 4 + 2) + 1
intLenth = intViewLine * (intHexWidth * 4 + 2)
strDisplayHex = Mid(strHex, intStart, intLenth)
intStart = intOriginY * (intHexWidth + 2) + 1
intLenth = intViewLine * (intHexWidth + 2)
strDisplayAscii = Mid(strAscii, intStart, intLenth)
'***************************************
'***************************************
'设置滚动条
'***************************************
frmMain.vsclHexEdit.Max = intLine - intViewLine
frmMain.hsclHexEdit.Max = (intViewWidth - frmMain.fraHexEditBackground.Width) \ ChrWidth + 1
'***************************************
'***************************************
'显示输出
'***************************************
frmMain.txtHexEditHex.Text = strDisplayHex
frmMain.txtHexEditText.Text = strDisplayAscii
frmMain.txtHexEditAddress.Text = strDisplayAddress
'***************************************
End Sub
'******************************************
'文本无变化的刷新
'******************************************
Public Sub ScrollRedisplay()
Call display
End Sub
'******************************************
'文本发生变化的刷新
'******************************************
Public Sub SlideRedisplay()
Call GetDisplayText
Call display
End Sub
以后代码在《串口编程调试代码》之二发表 希望和各位高手一同探讨学习！
QQ：11106404
--
|
|