发信人: reynolds()
整理人: reynolds(2001-12-06 10:10:19), 站内信件
|
原始发表者：3d.now
Two replica copies of one database are on two servers in Atlas Chemica
l's domain. The servers replicate once every day. When a document is d
eleted from one version of the database, it reappears after replicatio
n. What could cause this problem?
A. The purge interval and replication interval are equal.
B. The purge interval is longer than the replication interval.
C. The purge interval is shorter than the replication interval.
D. The cutoff date is inappropriate.
You answered: The correct answer is: C See Chapter 10: Troubleshooting
System Administration Problems
There is a connection document between Server1/AChemical and Server2/A
Chemical for Pull-Push replication. The "Call at times" option is set
to "6:00 AM-10:00 PM". The "Repeat Interval" is set to "90". A success
ful replication was completed at 8:31 PM. When will Server1/AChemical'
s replicator call to replicate again?
A. 6:00 AM the next day
B. 10:01 AM the next day
C. 10:00 PM the same day
D. 9:01 PM the same day
You answered: The correct answer is: A The repeat interval will trigge
r replication only if it is crossed within the range of times. See Cha
pter 1: Introduction to Application Development Components Rakesh 7/2
3/98 IF U WANT ANY
MORE QUESTIONS PLEASE EMAIL ME AT [email protected]
Server2/AChemical is set up to use Shared Mail for Delivery. A message
arrives that is addressed to a group of people. Only one member of th
e group's mail file is on Server2/AChemical. Where does the Non-Summar
y information sit?
A. In the active object store
B. In the user's mail file on the server
C. In the local replica of the user's mail file
D. In Mail.Box You answered: The correct answer is: B
At Atlas Chemical, the Domain administrator has determined that messag
e-based mail is the best option. What factors affected his decision?
A. Most mail users dial in remotely; mail files are distributed on man
y servers in the domain; mail, generally, is sent to groups.
B. Most mail users dial in remotely; mail files are distributed on man
y servers in the domain; mail, generally, is sent to individuals.
C. Most mail users dial in remotely; mail files are on a few mail serv
ers in the domain; mail, generally, is sent to individuals.
D. Most mail users use their mail database on the server and do not di
al in remotely; mail files are distributed on many servers in the doma
in; mail, generally, is sent to individuals.
You answered: The correct answer is: B
What secures a password from password capturing software?
A. Nothing
B. No Password
C. Multiple passwords
D. Anti-Spoofing
You answered: The correct answer is: D
Server10/AChemical is available to all users whether or not they can a
uthenticate. Three databases used by the sales department should only
be viewed by the members of the sales department. Members of the sales
department all have the /SAL OU1 (Atlas UserS/SAL/AChemical, for exam
ple). How can these databases be made available to the sales departmen
t only?
A. Hide the sales databases from the open database menu.
B. Use a directory link pointing to a directory where the databases ar
e located; limit the access to */SAL/AChemical".
C. Limit access to Server10/AChemical to those certified under /SAL/AC
hemical.
D. Place the databases on a server which is behind the firewall.
You answered: The correct answer is: B
A user has cleaned out the mail file. The user notices that the mail f
ile is the same size as before. What needs to be done?
A. Delete more documents.
B. Delete all file attchments.
C. Compact the database.
D. Update the indexes.
You answered: The correct answer is: C
What is dead mail?
A. Mail that can't be sent for 24 hours
B. Mail that the addressee (To:) is unknown
C. Mail that the addressor (From: ) is unknown
D. Mail that the adressee (To:) and the addressor (From: ) is unknown
You answered: The correct answer is: D See Chapter 10: Troubleshooting
System Administration Problems
Atlas Chemical's Domain has three named networks with two servers in e
ach network. There is one Hub server, which is one of the six servers
in the domain. What is the minimum number of connection documents with
the replication task (Pull-Push) enabled necessary to ensure distribu
tion of documents via replication?
A. One
B. Three
C. Five
D. Six
You answered: The correct answer is: C
One connection document between the Spoke servers and Hub servers. See
Chapter 1: Introduction to Application Development Components There i
s a connection document between Server1/AChemical and Server2/AChemica
l for Pull-Push replication. The "Call at times" option is set to "6:0
0 AM, 8:00 AM, 10:00 AM, 2:00 PM". The "Repeat Interval" is set to "90
". A successful replication was completed at 8:31 AM. When will Server
1/AChemical's replicator call to replicate again?
A. 2:00 PM
B. 9:00 AM
C. 10:00 AM
D. 6:00 AM
You answered: The correct answer is: C
The repeat interval does not come into play in this case. Atlas Chemic
al has decided to implement mail that is stored in one repository for
delivery only. How will this be implemented?
A. Use a server configuration document setting "Shared_Mail" to 2 for
all the servers.
B. Use the "Load Obj Collect" command at the server consoles.
C. Use "Tell router use srvmail" command at the server consoles.
D. Set Shared_Mail=1 in the servers' Notes.ini; restart the server.
You answered: The correct answer is: D See Chapter 2: Server and Clien
t Setup
Server1/AChemical initiates replication with Server2/AChemical as a re
sult of a server console Command Rep. What type of replication takes p
lace?
A. Pull-Pull
B. Pull-Push
C. Push Only
D. Pull Only
You answered: The correct answer is: B The default type of replication
is Pull-Push. See Chapter 1: Introduction to Application Development
Components
Whenever a database is accessed, the server crashes. You are the serve
r administrator, what would you do to resolve the problem?
A. Run fixup, then updall.
B. Run updall, then fixup.
C. Run fixup.
D. Run updall
You answered: The correct answer is: A See Chapter 10: Troubleshooting
System Administration Problems
Server1/AChemical is not receiving any documents from Server2/AChemica
l through replication. Server1/AChemical is receiving documents from o
ther servers in the domain. There is a connection document from Server
1/Achemical to Server2/AChemical for Mail Routing and pull-push Replic
ation every 4 hours and vice versa. Server2/Achemical is the Hub Serve
r for the Domain. What could be one of the reasons why replication is
failing?
A. In Hub Spoke Replication, the Hub should call the Spoke servers.
B. The length of time in the connection documents is too high.
C. There should be only one connection document for replication betwee
n two servers.
D. The modem on Server1/AChemical's modem is down.
You answered: The correct answer is: C Overlapping schedules could res
ult in replication not working. See Chapter 1: Introduction to Applica
tion Development Components
A user attempts to access a server. The message "You are not authorize
d to access the server" appears. What caused this message?
A. The user is in the deny access list.
B. The user is in the allow access list.
C. The user's ID has a different ancestor than the server.
D. The user is not listed as a person.
You answered: The correct answer is: A See Chapter 10: Troubleshooting
System Administration Problems
Atlas UserA/AChemical's mail file is located on Server1/AChemical. Atl
as UserA/AChemical temporarily relocates to a different city. Server2/
AChemical is a local phone call away from Atlas UserA/AChemical. As we
ll, Atlas UserA/AChemical requires access to Server4/AChemical. Server
3/Achemical is connected to Server4/AChemical and has a modem for dial
in. How can the client be set up to get mail and access Server4/AChem
ical?
A. Indicate Server2/AChemical as a passthru server on the active locat
ion document, create a dialup modem connection document for Server2/AC
hemical, and create a passthru connection document for Server3/AChemic
al.
B. Indicate Server2/AChemical as a passthru server on the active locat
ion document, create a dialup modem connection document for Server2/AC
hemical, create a passthru connection document for Server4/AChemical,
and create a connection document for Server3/AChemical.
C. Indicate Server2/AChemical as a passthru server on the active locat
ion document, create a dialup modem connection document for Server2/AC
hemical, create a passthru connection document for Server3/AChemical,
and create a connection document for Server3/AChemical.
D. Indicate Server2/AChemical as a passthru server on the active locat
ion document, create a dialup modem connection document for Server1/AC
hemical, create a passthru connection document for Server3/AChemical,
and create a connection document for Server3/AChemical.
You answered: The correct answer is: C See Chapter 2: Server and Clien
t Setup
The server, Server10/AChemical is designed to be made available to all
users whether or not they can authenticate. To protect databases from
users who are not known by name, how should the ACLs be set?
A. Set "*/AChemical" to No Access
B. Set "People" to No Access
C. Set "Anonymous" to No Access
D. Set -Default- to No Access
You answered: The correct answer is: C See Chapter 5: Security
What type of replication is initiated between a Notes Client and a Dom
ino Server?
A. Pull-Pull
B. Pull-Push
C. Push Only
D. Pull Only
You answered: The correct answer is: B See Chapter 1: Introduction to
Application Development Components
A database is implemented at Atlas Chemical that represents sales. Eac
h region should receive documents pertaining to that region only to sa
ve on disk space. What can be used to implement this?
A. ACL
B. Selective replication formulas
C. Replication schedule
D. Readers fields
You answered: The correct answer is: B See Chapter 3: Replication and
Chapter 4: Mail
Atlas Chemical is implementing a recertification scheme where all user
s will be certified under the /Dep/USR/AChemical certifier. They have
to create the Certifier ID first. What Certifier ID do they need to do
this wilth?
A. /AChemical certifier
B. /USR/AChemical certifier
C. Create a Certifier ID
D. No Certifier ID
You answered: The correct answer is: B See Chapter 3: Replication and
Chapter 4: Mail
An administrator cannot use the Remote user console. What controls acc
ess to the Remote server console?
A. ADMIN= in the Notes.ini file
B. Administrators field in the Server Document
C. Allow access field in the Server Document
D. Deny access field in the Server Document You answered: The correct
answer is: B See Chapter 10: Troubleshooting System Administration Pro
blems
What file contains all mail waiting for transfer?
A. Catalog.nsf
B. Log.nsf
C. Mail.box
D. Names.nsf You answered: The correct answer is: C See Chapter 3: Rep
lication and Chapter 4: Mail
How do you display the active threads on a Domino server?
A. SH U
B. S U
C. SH SE
D. SH TA You answered: The correct answer is: D See Chapter 3: Replica
tion and Chapter 4: Mail
What type of replication involves two replicators and exchanges docume
nts from both servers?
A. Pull-Pull
B. Pull-Push
C. Push Only
D. Pull Only
You answered: The correct answer is: A Pull-Pull involves the source s
erver's replicator and the target server's replicator. See Chapter 1:
Introduction to Application Development Components
Atlas Chemical's Domain has three named networks with two servers in e
ach network. There is one Hub server, which is one of the six servers
in the domain. What is the minimum number of connection documents with
the mail routing task enabled necessary to ensure distribution of doc
uments via routing?
A. One
B. Three
C. Five
D. Six
You answered: The correct answer is: D You need two connection documen
ts per Domino Named Network for mail routing. See Chapter 1: Introduct
ion to Application Development Components
Atlas Chemical would like to maintain a group that lists people who ar
e no longer allowed access to the server. The administrators would lik
e to limit the size of the Public Address Book. How can this group be
maintained with as little impact as possible on the Public Address Boo
k?
A. Set the Group Type to deny list only.
B. Set the Group Type to Access List only.
C. Set the Group type to multi purpose.
D. Set the group type to Mail only
You answered: The correct answer is: A See Chapter 5: Security
A user has changed names and can no longer access any server in the do
main. Why has this occurred?
A. The Administrator has changed the name in the person document.
B. The Administrator has removed the user from the Name and Address Bo
ok.
C. The group name has changed.
D. The user has changed the name without recertifying the ID.
You answered: The correct answer is: D See Chapter 10: Troubleshooting
System Administration Problems
The administrators are concerned about users losing their passwords. H
ow can this be managed?
A. Have users write down their passwords.
B. Use the open password certifier ID.
C. Use two passwords, require one, and have on password known to the a
dministrators.
D. Use two passwords, require both, and have one password known to the
administrators.
You answered: The correct answer is: C See Chapter 3: Replication and
Chapter 4: Mail
Atlas Chemical has implemented a PassThru strategy so that its users w
hose mail files are on Server2/AChemical can make one call to Server1/
Achemical, which contains the databases they replicate. In order for t
his to occur, what entries must be made on Server2/AChemical's Server
Document?
A. The users must be in the Access this Server field of the PassThru u
se section.
B. The servers must be in the Access this Server field of the PassThru
use section.
C. The servers must be in the Route Through field of the PassThru use
section.
D. The users must be in the Route Through field of the PassThru use se
ction.
You answered: The correct answer is: A See Chapter 2: Server and Clien
t Setup
A user has accidently deleted a document from the mail file. What is t
he best way to restore the document?
A. Copy the database.
B. Replicate the database to another replica copy.
C. Locate a backup of the mail file, and copy and paste the new docume
nt into the current mail file.
D. Delete the database. Create a new mail database.
You answered: The correct answer is: C See Chapter 10: Troubleshooting
System Administration Problems
A new administrator notices that documents are not being added to a da
tabase on the server via replication. Other databases with identical A
CLs are receiving documents, and other instances of the same databases
are receiving documents via replication. What could be the problem?
A. The replicaition queue doesn't include the database.
B. Push replication is not operational.
C. The database is a Copy, not a replica Copy.
D. There is no ACL.
You answered: The correct answer is: C See Chapter 10: Troubleshooting
System Administration Problems
The ACL is set in database, Access.NSF, so that members of the group,
Sales, have editor access. The group, MKT, has reader access. Atlas Us
erC/AChemical, a member of both groups, accesses this database. What a
ccess rights does Atlas Userc/AChemical have?
A. No Access
B. Reader
C. Editor
D. Manager
You answered: The correct answer is: C See Chapter 5: Security
During replications, what determines which documents at the source are
considered?
A. ACL
B. Server Name
C. Replication History
D. Source Replicator
You answered: The correct answer is: C See Chapter 3: Replication and
Chapter 4: Mail
The database, large.nsf, has been created on Server1/AChemical. The ?s
erver administrator is concerned about this database becoming too larg
e. The administrator ? would like to stop the database growth at 800 M
B. How can this be accomplished?
A. Set the maximum size at 800 MB.
B. Set the Warning at 800 MB.
C. Set the Quota to 800 MB.
D. Set the Threshold to 800 MB.
You answered: The correct answer is: C See Chapter 3: Replication and
Chapter 4: Mail
The ACL is set in database, Access.NSF, so that members of the group,
Sales, have editor access. Atlas UserB/AChemical, a member of the Sale
s group, is also listed as reader. What access does Atlas UserB/AChemi
cal have to this database?
A. No Access
B. Reader
C. Editor
D. Manager
You answered: The correct answer is: B See Chapter 5: Security
A user named "Joe Smith/DET/USR/AChemical" exists in the Atlas Chemica
l Domain. What is the Organization part of Joe's name?
A. AChemical
B. USR
C. DET
D. Joe Smith
You answered: The correct answer is: A Know the components of a name.
See Chapter 1: Introduction to Application Development Components
There is a connection document between Server1/AChemical and Server2/A
Chemical for Pull-Push replication. The "Call at times" option is set
to "6:00 AM-10:00 PM". The "Repeat Interval" is set to "90". The "Rout
e at Once" setting is set to 4 messages. Currently there are 4 low pri
ority messages in the MAIL.BOX file. The last successful mail transfer
was at 8:31 AM between the two servers. When will the router on Serve
r1/AChemical transfer a normal priority mail to Server2/AChemical?
A. 10:01 AM
B. When "MailNormalPriority=" setting in the Notes.INI indicates
C. 10:01 am unless the Route at Once threshold has been crossed
D. Immediately
You answered: The correct answer is: D
If the Route at Once threshold has been satisfied (with low priority m
ail in this case), normal mail is transferred immediately. See Chapter
1: Introduction to Application Development Components Where is the ac
tive object store identified to a router?
A. Mail1Obj.NSF
B. MailOBJ.NSF
C. Shared.NSF
D. UnShared.NSF
You answered: The correct answer is: B See Chapter 2: Server and Clien
t Setup
What determines how many replicators can be available on a Domino serv
er?
A. Number of CPUs
B. Number of Users
C. Memory
D. Hard Disk Space
You answered: The correct answer is: A See Chapter 1: Introduction to
Application Development Components
Atlas UserC/AChemical can't attach to the server. To determine what is
wrong, what can the server administrator use?
A. Mail trace
B. Return receipt
C. Replication
D. Network trace
You answered: The correct answer is: D See Chapter 10: Troubleshooting
System Administration Problems
What file contains all information about users and servers in a domain
?
A. Catalog.nsf
B. Log.nsf
C. Mail.box
D. Names.nsf
You answered: The correct answer is: D See Chapter 3: Replication and
Chapter 4: Mail
Server2/AChemical is using shared mail for Delivery only. The administ
rator notices that the object store database, MailObj1.nsf is getting
large. What server console command can the administrator use to manage
the size of the object store?
A. LOAD OBJECT COLLECT MailObj1.NSF
B. LOAD OBJECT COLLECT -FORCE MailObj1.NSF
C. LOAD OBJECT COLLECT -COMPACT MailObj1.NSF
D. LOAD OBJECT COMPACT MailObj1.NSF
You answered: The correct answer is: C See Chapter 2: Server and Clien
t Setup
Server1/AChemical and Server2/AChemical connect to route mail in Atlas
Chemical's domain. The preferred pathway is to use TCP/IP between the
servers. Recognizing the importance of mail routing in the domain, ho
wever, the administrators have placed a modem on each server as a back
up communication pathway only. That is, they would like the TCP/IP por
t to be attempted more than once then, resort to the modems. How can t
his be accomplished?
A. Add the Com port with the modems in the current connection document
s.
B. Create connection documents for both servers using Com ports. Set t
he routing cost to 1.
C. Do nothing; the com ports will automatically be used.
D. Create connection documents for both servers using Com ports. Set t
he routing cost to 10. You answered: The correct answer is: D See Chap
ter 2: Server and Client Setup
When is the file MAIL.BOX created on the Notes Client?
A. At User setup
B. The first time a location document with "Dialup Modem" as the locat
ion type is selected.
C. The first time a location document with "COMx" as an active port (w
here x is a number) is selected
D. When "Dialup" is selected under User Preferences, Modem setup
You answered: The correct answer is: B See Chapter 1: Introduction to
Application Development Components
The Administrators would like to secure the certifier IDs at the organ
ization. They would like to have more than one administrator prove the
access to the ID. They cannot guarantee all administrators can be ava
ilable to use the certifier ID. How might this be implemented?
A. Use a single password, shared by many administrators.
B. Use multiple passwords, require one.
C. Use multiple passwords, require more than one.
D. Use multiple certifier IDs.
You answered: The correct answer is: C See Chapter 3: Replication and
Chapter 4: Mail
A user named "Joe Smith/DET/USR/AChemical" exists in the Atlas Chemica
l Domain. What is the Organizational Unit1 part of Joe's name?
A. AChemical
B. USR
C. DET
D. Joe Smith
You answered: The correct answer is: B See Chapter 1: Introduction to
Application Development Components
Which of the following statments is not indicative of how an object st
ore database is protected from unauthorized use?
A. ACL set so the icon cannot be loaded at the Server's Notes Client
B. ACL set so that only the administrator can load the icon
C. No Views
D. Encrypted using the server's public key
You answered: The correct answer is: B See Chapter 2: Server and Clien
t Setup
The database, large.nsf, is 1.8 MB. The maximum size of this database
?is 2 GB. What method cannot be used to establish a new size limit?
A. Create a new copy with a new maximum size.
B. Create a new replica with a new maximum size.
C. Create a new replica stub with a new maximum size.
D. Use the database tool in the server admin panel to set the new maxi
mum size.
You answered: The correct answer is: D See Chapter 3: Replication and
Chapter 4: Mail
A user attempts to access the mail file on the server. The message, "S
erver not available on any port" appears. What is the cause of this pr
oblem?
A. The port is not enabled.
B. The user is dialing in.
C. The current location document doesn't have the port specified.
D. The icon represents a local database.
You answered: The correct answer is: C See Chapter 10: Troubleshooting
System Administration Problems
The Atlas administrators wish to implement a database. The database wi
ll be available on all servers. All users will input data into the dat
abase. All replica copies of the database should contain all documents
. The database's design will be changed at the Hub Server. The Hub Ser
ver is in the group Hub Servers; the Spoke Servers are in the group Sp
oke Servers. With regard to servers, how should the Access Control Lis
t for the Database be set?
A. Hub Servers, Manager; Spoke Servers, Author.
B. Hub Servers, Manager; Spoke Servers, Reader.
C. Hub Servers, Manager; Spoke Servers, Designer.
D. Hub Servers, Manager; Spoke Servers Depositor.
You answered: The correct answer is: C See Chapter 2: Server and Clien
t Setup
A user attempts to send an encrypted mail to another user and fails. W
hat could cause the problem?
A. The private key of the target user is not in the Name and Address B
ook.
B. The public key of the target user is not in the Name and Address Bo
ok.
C. The private key of the source user is not in the Name and Address B
ook.
D. The public key of the target user is not in the Name and Address Bo
ok.
You answered: The correct answer is: B See Chapter 10: Troubleshooting
System Administration Problems
Atlas Chemical has a suite of Notes Databses that is used by the entir
e company. The administrators would like to direct the users to load o
ne database with pointers to these databases. How can this be enabled?
A. Publish the databases to a Library directory, and make the Director
y accessible to all users.
B. Create a Database Library, publish the databases to this Library, a
nd make the Library accessible to all users.
C. Create a Database Library, and make the Library accessible to all u
sers.
D. Create a Database Library, copy the databases to this Library, and
make the Library accessible to all users.
You answered: The correct answer is: B See Chapter 2: Server and Clien
t Setup
To limit access to their servers, the Server Administrators at Atlas ?
Corporation have implemented a standardized list. They limit access to
people in the Public Address ? Book, the servers in the local domain
servers, and servers in domains outside their own domain. ?They explic
itly deny access to a group that lists people who have previously acce
ssed the server but ?are no longer allowed. A person attempts to acces
s the server and is denied, but the person is ?listed in the Public Ad
dress Book. Why is the person denied?
A. She is not in the local domain servers group.
B. She is in the deny access group
C. She is not in the people group
D. She is in the other domain group.
You answered: The correct answer is: B See Chapter 5: Security
What determines which databases appear on the Replicator tab of the No
tes Client?
A. Copies of databses from servers
B. Replica copies of databases from servers
C. The "Databases on Replicator Page" setting in User Preferences
D. The Location document
You answered: The correct answer is: B When a replica copy of a databa
se is established, its icon appears on the Replicator tab. See Chapter
1: Introduction to Application Development Components
The Administrators at Atlas Corporation would like to use the Administ
ration Process to change the names of their users. What needs to be in
place for this to happen?
A. Administration server set for Public Address Book; Certlog.nsf crea
ted on the server where name changes take place; Hierarchical naming;
Replication enabled; Administration server established for databases w
here the ACL will automatically change.
B. Administration server set for Public Address Book; Administrators c
an edit people documents in Public Address Book and Admin4.NSF; Certlo
g.nsf created on server where name changes take place; Hierarchical na
ming; Replication enabled; Administration server established for datab
ases where the ACL will automatically change.
C. Administration server set for Public Address Book; Administrators c
an edit people documents in Public Address Book and Admin4.NSF; Hierar
chical naming; Replication enabled; Administration server established
for databases where the ACL will automatically change.
D. Administration server set for Public Address Book; Administrators c
an edit people documents in Public Address Book; Certlog.nsf created o
n server where name changes take place; Hierarchical naming; Replicati
on enabled; Administration server established for databses where the A
CL will automatically change.
You answered: The correct answer is: B See Chapter 3: Replication and
Chapter 4: Mail
Atlas administrators wish to implement a database in their domain. The
y want all regions represented by Spoke Servers to input data. They wa
nt all the data to be collected centrally on the Hub Server. Each regi
on should have data pertaining only to the region. What security facil
ity might be implemented to achieve this goal?
A. ACL restrictions
B. Readers fields
C. Authors fields
D. Replication types
You answered: The correct answer is: B See Chapter 2: Server and Clien
t Setup
On a Notes Client, what determines which ports are active?
A. The active connection document
B. File Tools, User Preferences, Ports setting
C. The active location document
D. The last port used (as indicated in the Notes.ini file)
You answered: The correct answer is: C See Chapter 2: Server and Clien
t Setup
A change has been made to Names.nsf on the server, Server1/AChemical.
? Server2/AChemical would like to receive the changes without taxing t
he server. What is ? the command to do this??
A. REplicate names.nsf ServerA/AChemical?
B. REplicate ServerA/AChemical names.nsf?
C. Pull names.nsf ServerA/AChemical?
D. Pull ServerA/AChemical names.nsf?
You answered: The correct answer is: D See Chapter 3: Replication and
Chapter 4: Mail
A new modem has been purchased. When setting up the port, a modem file
is not listed for the modem. What modem file should be used?
A. Null Modem
B. Auto Configure
C. Hayes Modem
D. Build a modem file
You answered: The correct answer is: B See Chapter 10: Troubleshooting
System Administration Problems
The ACL is set in database, Access.NSF, so that members of the group,
Sales, have editor access. The group, MKT, has no access access. Atlas
UserC/AChemical, a member of both groups, accesses this database. Wha
t access rights does Atlas Userc/AChemical have?
A. No Access
B. Reader
C. Editor
D. Manager
You answered: The correct answer is: A See Chapter 5: Security
Two replica copies of one database are on two servers in Atlas Chemica
l's domain. The servers replicate once every day. When a document is d
eleted from one version of the database, it reappears after replicatio
n. What could cause this problem?
A. The purge interval and replication interval are equal.
B. The purge interval is longer than the replication interval.
C. The purge interval is shorter NavMan 7/9/98 1.Name three notes ses
sions? 2.What's the maximum number of replicators you can run on a ser
ver? 3.Servers idntify replica copies through? ChetNet 6/24/98 Had pr
oblems taking the SA1 test, got lost in the translation
Lola 6/23/98 the questions below, shared mail, passthru server, replic
ation. a lot of replcation. 4/20/98 1. Qweken wants to close the notes
server what command should she issue at the server console
A Stop
B End
C Exit
D Tell Server Quit
Answer C
2. What command should be used on server A to replicate to Server B
A Pull ServerA
B rep serverA
C rep ServerB
D Push ServerA
Answer B
3. What command should be used on ServerA for a two way replication of
the public name and address book on Server B
A replicate names.nsf
B replicate serverB names.nsf
C route serverB name.nsf
D replicate serverB public name and address book Answer B
4. Tim wants to employ a Hub and Spoke architecture where the Hub serv
er performs all of the work what replication setting should he use
A PULL-PUSH
B PULL-PULL
C PUSH-PUSH
D PULL
Answer A
5. What should the default ACL setting be of Mail.box
A Reader
B Depositor
C Manager
D No Access
Answer B
6. In order for Server A to Route Mail to Server B what is should the
minimum setting of the remote mail.box be
A Reader
B Depositor
C Manager
D No Access
Answer B
7. When should a server protocol be initially setup (can't remember th
e full question)
A During Server configuration
B During the server setup
C Manually in the Server document
D Manually in a connection document
Answer A
8. Gwen sets a new port on her workstation which of the following woul
d she have selected
A Driver
B Operating System
C ?
D ?
Answer A
9. Joe wishes to setup a connection to a pass-thru server which docume
nt type must he create
A Server Configuration document
B Remote Connection document
C Pass-thru Server connection document
D Cluster connection document
Answer C
10. Amy wants to setup shared mail so that all messages sent use a sha
red message store what should she do
A Set all users Shared Mail options to on
B Edit each person document and configure the shared mail field
C Set Shared mail=1
D Set Shared Mail=2
Answer D
11. 12 Databases are replicating from ServerA to ServerB but one isn't
why might this be
A Encryption was used on the documents on ServerB and ServerA does not
have the encryption key
B The ServerA only has editor access to ServerB
C ?
D ?
Answer
12. Susy uses a Hub-and-Spoke architecture to replicate a database to
multiple sites. She wants to make sure that only each company can edit
their documents. How can she achieve this?
A Put serverA and users in the readers fields of the documents
B Put serverA and users in the Authors fields of the documents
C Use a Replication formula
D Set the Database ACL to Readers
Answer B
13. Administrator deletes documents in a replicated database but they
keep reappearing, why could this be?
A Because the database is being replicated
B Because the Replication interval is faster than the purge interval
C Because the purge interval is faster than the replication interval
D Because the documents have not been deleted on all replicas of the d
atabase
Answer B
14. A database called Quota.NSF is not replicating with another databa
se called Quotas.nsf what could be the problem?
A database Titles are different
B Database file names are different
C Replication IDs are different
D Database has a shit name (or something)
Answer C
15. In order to create a new replica on a server what field must be fi
lled in
A Create New Databases
B Create Replica Databases
C Administrators
D No fields need to be configured Answer B
16. An Administrator wants to free disk space from his shared mail dat
abase how can this be done?
A Object Collect
B Load Collect Object
C Load Object Collect
D Load compact
Answer C
--
※ 修改:．reynolds 于 Jul 2 09:35:05 修改本文．[FROM: 202.96.182.74]
※ 来源:．月光软件站 http://www.moon-soft.com．[FROM: 202.38.212.112]
|
|