发信人: amac((四棵))
整理人: amac(2001-11-30 14:52:59), 站内信件
|
internet--155M EBGP--router1---155M IBGP---router2
|| ||
|| ||
NO.1 2M OSPF NO.2 8M OSPF
|| ||
|| ||
|| ||
|| ||
ROUTER 3
ospf
1、到ROUTER 3 的流量大约有10M左右，怎样才能让NO.1和NO.2按比例负载
即NO.1走2M左右,NO.2走8M左右的流量
2、ROUTER1、ROUTER2、ROUTER3我该如何去配置？
谢谢!
ROUTER1
interface Serial1
bandwidth 2048
ip address A.B.C.D 255.255.255.224
no ip directed-broadcast
rate-limit input 2048000 102400 102400 conform-action transmit exceed-action drop
rate-limit output 2048000 102400 102400 conform-action transmit exceed-action drop
ROUTER2
interface Serial2
bandwidth 8192
ip address A.B.C.D 255.255.255.224
no ip directed-broadcast
rate-limit input 8192000 409600 409600 conform-action transmit exceed-action drop
rate-limit output 8192000 409600 409600 conform-action transmit exceed-action drop
|
|